Great Planes Extra 330SC 3D 3mm Foam Indoor EP ARF GPMA1129

Great Planes

Item # GPMA1129
$79.99 $49.99
(You save $30.00)
Status: In Stock
Build Type:
Almost Ready to Fly
Power Type:
Electric Power
Skill Level:
Skill Level 3
Vehicle Type:
Airplane
UPC:
735557011291
Availability:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Great Planes Extra 330SC 3D 3mm Foam Indoor EP ARF GPMA1129

More information about Great Planes Extra 330SC 3D 3mm Foam Indoor EP ARF GPMA1129

 

This is the Great Planes ElectriFly Extra 330SC 3D Electric ARF Foam Plane.

The Extra 330SC performs 3D the same way it assembles: with virtually effortless ease and impressive results! Simplicity and factory-installed extras push assembly time to the minimum, while an all-up weight of just over 6 ounces pushes performance to the limit!

Includes:
One Great Planes ElectriFly Extra 330SC 3D Foam Plane with landing gear, wheels, motor mount, pushrods, carbon rods, brace doublers, control horns and instruction manual

Requires:

  • Radio: 4-channel with mini receiver
  • Servos: Three micro high torque
  • For Indoor Flight Performance-
    Motor: RimFire 250 
    Battery: 7.4V 300mAh LiPo
    ESC: 8amp Brushless
    Propeller: 8x4E
  • For Outdoor Flight Performance-
    Motor: RimFire 300 
    Battery: 11.1 volt 300mAh 
    ESC: 8amp Brushless 
    Propeller: 8x4E 
  • Battery charger and building & field equipment

  • Construction: 3mm extruded polystyrene Pro-formance foam, an
  • ElectriFly exclusive, control surfaces are prehinged with 3M
  • Blenderm tape hinges
  • Wing: One-piece with factory installed carbon fiber wing spars
  • Motor Mount: Pre-drilled plywood
  • Landing Gear: Wire
  • Wheels: Five-spoke, black nylon
  • Warranty: Great Planes Model Manufacturing Co. guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.

Length: 35" (890mm)
Wingspan:
32.5" (825mm)
Wing Area: 267 sq in (17.2 sq dm)
Wing Loading: 3.4 - 3.7oz/sq ft (10 - 11g/sq dm)
Weight: 6.2 - 6.8oz (175 -195g)
Center of Gravity: 5/8" (16mm) aft from the carbon strip in the wing

Control Throws
Low Rate
Elevator:
1" 25mm 18 degrees
Rudder: 1-5/8" 41mm 19 degrees
Ailerons: 1" 25mm 13 degrees

High Rate
Elevator:
1-7/16" 35mm 25 degrees
Rudder: 2-5/8" 67mm 32 degrees
Ailerons: 1-3/4" 44mm 22 degrees

3D
Elevator:
2" 50mm 38 degrees
Rudder: 3-3/4" 95mm 29 degrees
Ailerons: 3-3/4" 95mm 56 degrees

You Might Also Like...