Great Planes Revolver GP/EP Sport Aerobatic ARF 59" GPMA1018

Great Planes

Item # GPMA1018
$299.99 $229.99
(You save $70.00)
Status: In Stock
Build Type:
Almost Ready to Fly
Power Type:
Nitro Power
Skill Level:
Skill Level 4
Vehicle Type:
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>
Great Planes Revolver GP/EP Sport Aerobatic ARF 59" GPMA1018

More information about Great Planes Revolver GP/EP Sport Aerobatic ARF 59" GPMA1018


Great Planes Revolver's contemporary styling makes it a real standout on the flight line. Once it's airborne, it really takes center stage and that's regardless of whether it's equipped with a glow engine or brushless motor! Get ready to fire off one crowd-pleasing maneuver after another with the Revolver it's the sports car of sport aerobats!


  • Engine: .46 -.55 cu in (7 - 9cc) two stroke OR .70 cu in (11.5cc) four stroke OR brushless motor (see below)
  • Muffler: Pit's type M
  • Motor: Brushless type Great Planes RimFire
  • Motor Mount: Medium size,
  • Electronic Speed Control: 80A (GPMM1860)
  • Radio: 4-channel minimum
  • Servos: 4 standard size coreless ball bearing for electric operation,
  • one extra servo required for throttle if using glow engine
  • 6 (152mm) Servo Extension: (HCAM2701)
  • Y-Harness: One for aileron servos (HCAM275)
  • Battery: Two 3200mAh 11.1V Balanced LiPo (GPMP0727)
  • Equinox LiPo Cell Balancer: (GPMM3160)
  • Adapter: Deans U Adapter 2 to 1 (GPMM3143)
  • Battery Charger: LiPo compatible (GPMM3015)
  • Propeller: Glow, size depending on engine selected
  • Electric, 11.5x5 (APCQ1055)
  • Misc. Items: Building and field equipment
  • Select balsa and ply are used for the fuselage and tail section; the 2-piece, plug-in wing features a wire cut foam core that is balsa-sheeted
  • Airfoil-shaped tail surfaces allow the plane to lock in and track solidly
  • Comes with a complete package of quality Great Planes hardware
  • Only about 10 hours of final assembly are required before your Revolver is flight-ready.
  • Cowl and wheel pants: The fiberglass cowl, wheelpants, and landing gear are painted in high gloss colors to match the trim scheme.
  • Canopy: Not only does the clear canopy come installed, it also has a great-looking frame painted on it. You also get a realistic-looking pilot figure.
  • Aileron: Short and direct aileron linkages deliver strong, accurate control during high- and low-speed flight.
  • Rimfire: The bolt pattern on the firewall lines up exactly for either a .46-.70 glow engine mount or a motor mount for installing a brushless out-runner motor.
  • Battery: On-board radio gear is quickly accessed through this hatch. It also makes it easy to change LiPo battery packs when equipped with an ElectriFly™ brushless power system.
Wingspan: 59" (1500mm)
Wing Area:
563 sq in (36 sq dm)
Flying Weight:
6 - 7lb (2720 - 3180g)
Wing Loading:
25 - 29 oz/sq ft (76 - 88 g/sq dm)
48" (1220mm)
Semi symmetrical
Center of Gravity:
4-5/16" (110mm) Back from the leading edge of the wing at the fuselage

Control Throws
Low Rate
Up & Down 5/16" (8mm)
Right to Left 1-3/8" (35mm)
Up & Down 1/4"  (6mm)

High Rate

Up & Down 1/2" (13mm)
Right to Left 2-1/4" (57mm)
Up & Down 3/8" (10mm)

You Might Also Like...