Great Planes Stinger II .46 ARF GPMA1010

Great Planes

Item # GPMA1010
$219.99 $159.99
(You save $60.00)
Status: In Stock
Build Type:
Almost Ready to Fly
Power Type:
Nitro Power
Skill Level:
Skill Level 4
Vehicle Type:
Airplane
UPC:
735557010102
Great Planes Stinger II .46 ARF GPMA1010

More information about Great Planes Stinger II .46 ARF GPMA1010

 

This is the Great Planes Stinger II .46 ARF Sport Aerobat Airplane.

Includes: One Great Planes Stinger II Sport Aerobat ARF Airplane with Fuel Tank, Landing Gear, Wheels, Decals, Wheel Pants and Instruction Manual

Requires

  • Radio: At least four channel
  • Servos: Five standard ball bearing
  • 6" (152mm) Servo Extensions: Two for ailerons
  • Y Harness: For aileron servos if using radio with no mixing functions
  • Engine: .46-.55 cu in (7.5-9cc) 2-stroke OR .70-.72 cu in (11.5-12cc)
  • 4-stroke
  • Muffler: Pitts style
  • Building and field equipment

  • Made of balsa and plywood
  • Two-piece wing design with joiner tube
  • Dual servo aileron control
  • Top Flite MonoKote covering
  • Painted fiberglass cowl
  • Clear plastic canopy with painted pilot bust, lifts off for access to radio gear compartment
  • Red Plastic spinner, 2.75" (70mm)
  • Two-piece composite engine mount
  • Aluminum landing gear, 0.12" (3mm) thick
  • Foam main wheels, 2.5" (63mm) diameter, 1" (25.4mm) tailwheel
  • Painted fiberglass wheel pants
  • Fuel Tank is 9oz (260cc)
  • Building Time: Ready to fly in several hours
  • Warranty (through the manufacturer): Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

Wingspan: 49.5" (1255mm)
Wing Area: 586 in² (37.8dm²)
Weight: 5-5.5 lb (2,270-2,490 g)
Wing Loading: 20-22 oz/ft² (61-67 g/dm²)
Length: 46" (1,170mm)
Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of the wing at the fuselage side

Control Throws
Low Rate
Elevator Up & Down:
5/8" (16mm) 12 degrees
Rudder Right & Left: 1" (25mm) 11 degrees
Ailerons Up & Down: 5/8" (16mm) 10 degrees

High Rate
Elevator Up & Down:
3/4“  (19mm) 15 degrees
Rudder Right & Left: 2-5/8" (67mm) 31 degrees
Ailerons Up & Down: 15/16" (24mm) 15 degrees