This is the radio controlled, electric powered, Multiplex Dogfighter airplane kit. Intended for intermediate and advanced fliers.
Includes: DogFighter Airplane Kit with Spinner, two Decal Sheets, Linkages, Hardware and Instruction Manual
Note: When using the recommended FlightPower LiPo battery, solder a Deans Male Ultra plug to the ESC. This connector will plug into the Ultra Female plug on the FlightPower battery.
This model is NOT made of styrofoam and it is not possible to glue Elapor foam using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.
Wingspan: 35" (889mm)
Wing Area: 296 sq/in (19.12 sq/dm)
Wing Loading: 14.6oz sq/ft (42.7g sq/dm)
Fuselage Length: 32" (813mm)
Weight: 30oz (850.4g)
Center of Gravity (CG): 2.7" (68mm) from the leading edge of the wing at the fuselage side
Elevator, Up and Down: 0.27" (7mm)
Rudder, Left and Right: 0.79" (20mm)
Ailerons: Up 0.55" (14mm), Down 0.31" (8mm)