This is the Multiplex FunCub Trainer Airplane Kit. For Beginner Modeler/Fliers.
Includes: Pre-molded wings, fuselage and tail assemblies, pushrods, all hardware, pre-bent 0.039 (1mm) wire landing gear, two 4.75 (120mm) main wheels, 2 (51mm) tailwheel, plastic motor mount, two fiberglass wing spars, two decal sheets, photo-illustrated instructions and tow hook
Note: This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.
Wingspan: 55.1" (1400mm)
Wing Area: 588 sq in (38 sq dm)
All Up Weight: 39.9oz (1130g)
Wing Loading: 9.8oz/sq in (30g/sq dm)
Length: 38.6" (980mm)
Airfoil: Flat bottom high-wing placement
Center of Gravity: 3.1" (80mm) Back from the wing's leading edge at the fuselage
Elevator: Up 0.59" (15mm), Down 0.47" (12mm)
Rudder: Right to Left 0.59" (15mm)