Multiplex Fun Glider RR MPUM264273


Item # MPUM264273
$273.95 $170.99
(You save $102.96)
Status: Out of stock
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>
Multiplex Fun Glider RR MPUM264273

More information about Multiplex Fun Glider RR MPUM264273

This is the Radio Controlled, Electric Powered, Multiplex Fun Glider RR; the compact, agile hobby sailor! This electric sailor becomes a fun model for hobbing pilots. The RR model is 100% finished. Mount your own receiver, load the drive accumulator (3S-950 mA), load the wings and the heights, and the aircraft is already ready for use. The FunGlider is fun. It is handy, agile and very agile over all axes. The powerful Brushless drive makes sporty artillery flights and long flight times very easy. Due to the low speed of descent and the good circular-flow characteristics, the model makes a lot of fun with both slope and thermal flying. Fast flight maneuvers and descents are no problems thanks to their high strength. 

1x Multiplex Fun Glider RR
1x Brushless Motor
1x ESC
1x Decal Set
1x Instruction Sheet

6-channel radio
Four Nano-sized servos
3S LiPo battery with at least 950mAh
Compatible charger & charging bag
Field & maintenance equipment

  • Elapor foam construction for damage resistance
  • White in color
  • Dual servo aileron control
  • Painted canopy
  • Convenient battery access
  • Permax brushless BL-O 2816-0900
  • MULTIcont BL-20 SD ESC
  • 9x6 folding propeller

Wingspan: 51.18" (1300mm)
Wing Area: Approx. 317.8 sq in (20.5 sq dm)
Wing Loading: Min 9.5 oz/sq ft (28.9 g/sq dm)
Overall Length: 31.49" (800mm)
Weight: 20.81 oz (590g)
Control Functions: Aileron, Elevator, Rudder, Throttle
Center of Gravity (CG): 2.24" (57mm) back from the leading edge of the wing measured at the fuselage

Control Throws-
Elevator: Up 0.39" (10mm), Down 0.39" (10mm)
Rudder: Right to Left 0.59" (15mm)
Ailerons: Up 0.47" (12mm), Down 0.24" (6mm)
Spoilers: Both ailerons up 0.55" (14mm)

Elevator Compensation-
Spoilers: 0.14" (3.5mm) down
Power: 0.039" (1mm) down

RPM/V: 900
Optimum Working Range: 10-14A
Max Current for 15 sec.: 18A
Max Output: 200W
Max Rotational Speed: 15,000 Umin
Shaft Diameter: 4mm
Can Diameter: 1.1" (28mm)
Can Length: 1.2" (31mm)
Weight: (72g)
Mounting Holes: 4xM3 (19 / 16mm)

You Might Also Like...