Multiplex Heron RR MPUM264276


Item # MPUM264276
$479.95 $299.99
(You save $179.96)
Status: Out of stock
Build Type:
RX-TX Ready
Power Type:
Electric Power
Skill Level:
Skill Level 1
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Multiplex Heron RR MPUM264276

More information about Multiplex Heron RR MPUM264276

This is the Multiplex Heron receiver-ready 2.4M glider.

Includes: RR Multiplex Heron 2.4M Glider with Motor, Servos, Servo Extensions Folding Propeller, Spinner and Instruction Manual


  • Radio: 6-channel
  • Battery: 3S 2200mAh LiPo such as the FlightPower, if using this battery, the M6 connector on the ESC must be removed and a Dean's Male Ultra Plug, must be soldered to the ESC to mate with the connector on this battery
  • Battery Charger: To match selected battery
  • Charging bag, building and field equipment

Note: This model is NOT made of Styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.

  • Construction: Elapor foam, detachable wing and tail sections
  • Wing: CFRP/aluminum tubular spars, four flap design, detachable for easy transport
  • Fuselage: GRP "M" space technology design for high degree of rigidity
  • Canopy: Clear with detailed cockpit
  • Brushless Motor: Permax BL-O 3516-0850
  • Electronic Speed Control: MULTIcont BL 40 S-BEC 40A
  • Servos: Six, four HS-81 micro and two HS-55 sub micro
  • Spinner: 2.2" (55mm) white foam
  • Propeller: 12x6 folding
  • Canopy: Clear with detailed cockpit

Wingspan: 7.87' (2.4m)

Length: 3.60' (1.09m)

Weight: 2.9lbs (45.87oz) glider, 3.3lbs (52.91oz) with electrics

Wing Area: (41.3 sq/dm)

Wing Loading: (32.7-37.5g sq/dm)

Center of Gravity (CG): 2.5" (65mm) back from the leading edge of wing measured at the fuselage

Control Throws

Rudder: 0.78" (20mm)

Elevator: 0.39" (10mm), Powermix 0.0196" (0.5mm)

Down elevator mix with flap speed/thermic 0.059" (1.5mm)

Ailerons: Up +0.63" (+16mm), Down -0.31" (-8mm)

Flap +0.079/-0.079" (+2/-2mm)

Flaps (camber changing flaps)

Aileron: 0.39" (10mm)

Up (speed) 0.12" (3mm)

Down (thermic) 0.14" (3.5mm)

Spoilers (butterfly)

Both Ailerons Up: 0.87" (22mm)

Both Flaps Down: 1.02" (26mm)

Down-Elevator Mix with Spoiler: 0.196" (5mm)

You Might Also Like...