Multiplex ParkMaster Pro Kit Plus MPUM264275


Item # MPUM264275
$319.95 $189.99
(You save $129.96)
Status: Out of stock
Build Type:
Almost Ready to Fly
Power Type:
Electric Power
Skill Level:
Skill Level 3
Vehicle Type:
Multiplex ParkMaster Pro Kit Plus MPUM264275

More information about Multiplex ParkMaster Pro Kit Plus MPUM264275

This is the radio controlled, electric powered, Multiplex ParkMaster Pro Park Flyer airplane kit with power set. These are for intermediate modelers with fully 3D capable, can be flown outdoors in moderate wind. The Multiplex ParkMaster PRO is a true champion, capable of pulling off ridiculous gravity-defying aerobatics. The ParkMaster Pro's body is comprised of square-section carbon fiber spars for an unbelievably rigid fuselage, wing, and tailplane. The undercarriage also comes reinforced with carbon fiber to protect against any hard landings. The improved motor mount is capable of holding motors more powerful than stock and looks great when combined with the optional carbon motor bulkhead. The ParkMaster Pro is comfortable in both confined and wide open spaces, and it's able to easily perform tumbles, torque-rolls, and square loops even in moderate winds.

The ParkMaster PRO is available as a kit as well as a Kit plus version. The Kit plus includes a set of power system components that were carefully chosen to accompany this model.


  • Pre-molded wings
  • Fuselage and tail assemblies
  • Pushrods
  • All hardware
  • Pre-bent 0.008 (2mm) wire landing gear
  • Two 2 (51mm) main wheels
  • Plastic motor mount
  • Decal sheet
  • Photo-illustrated instructions
  • Motor
  • ESC
  • Propeller


  • 3S 11.1V 950mAh LiPo battery
  • LiPo compatible battery charger
  • 4-6 channel transmitter and receiver
  • Building and field equipment

Note: This model is NOT made of Styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.

  • Construction: Elapor foam white in color
  • Wings: One-piece all foam
  • Motor: Himax C 1220 brushless
  • Electronic Speed Control: BL-30S S-
  • Servos: Four Nano-Karbonite
  • Radio Compartment: Accessible under wing
  • Aileron Control: Dual servo
  • Landing Gear: Main, prebent fixed wire 0.008" (2mm) diameter
  • Wheels: Two foam 2" (51mm)
  • Motor Mount: CFRP reinforced for maximum durability
  • Canopy: Elapor foam
  • Decals: Precut peel and stick application with green, red and black accents
  • Building Time: Ready to fly in several hours

Wingspan: 38.4" (975mm)

Wing Area: 450 sq in (29 sq dm)

Weight: 18.4oz (522g)

Wing Loading: 5.9 oz/sq ft) (18 g/sq dm)

Length: 40.5" (1029mm)

Airfoil: Fully symmetrical, mid-wing placement

Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing's leading edge at the fuselage


Control Throws

Ailerons: 2.5" (65mm)

Elevator: 2.5" (65mm)

Rudder: 3.5" (90mm)