Multiplex ParkMaster PRO MPUM214275


Item # MPUM214275
$139.95 $89.99
(You save $49.96)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Multiplex ParkMaster PRO MPUM214275

More information about Multiplex ParkMaster PRO MPUM214275

This is the Multiplex ParkMaster PRO. Designed for durability with carbon fiber the Park master PRO is able to pull off a variety of tricks even in areas where wind or space is an issue.

Includes: Pre-molded wings, fuselage and tail assemblies, pushrods, all hardware, pre-bent 0.008 (2mm) wire landing gear, two 2 (51mm) main wheels, plastic motor mount, decal sheet and photo-illustrated instructions


  • Motor: 1220Kv brushless outrunner, Multiplex makes a Power Set #332652 (not carried) for the ParkMaster Pro that includes a Himax C 2816-1220 brushless motor, 30A ESC, and 10x4.7E Propeller
  • Battery: 3S 11.1V 950mAh LiPo
  • Battery Charger: LiPo compatible
  • Radio: 4 channel
  • Servos: Four micro, 2-Aileron, 1-Elevator, 1-Rudder
  • Misc. Items: Building and field equipment

Note: This model is NOT made of Styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.

  • Construction: Elapor foam white in color
  • Wings: One-piece all foam
  • Radio Compartment: Accessible under wing
  • Aileron Control: Dual servo
  • Landing Gear: Main, pre-bent fixed wire 0.008" (2mm) diameter,
  • Wheels: Two foam 2" (51mm)
  • Motor Mount: CFRP reinforced for maximum durability
  • Canopy: Elapor foam
  • Decals: Precut peel and stick application with green, red and black accents
  • Building Time: Ready to fly in several hours

Wingspan: 38.4" (975mm)

Wing Area: 450 sq/in (29 sq/dm)

Weight: 18.4oz (522g)

Wing Loading: 5.9oz. sq/ft) (18g sq/dm)

Length: 40.5" (1029mm)

Airfoil: Fully symmetrical, mid-wing placement

Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing's leading edge at the fuselage

Control Throws

Ailerons: 2.5" (65mm)

Elevator: 2.5" (65mm)

Rudder: 3.5" (90mm)

You Might Also Like...