Multiplex Twin Star II Kit MPUM214279

Multiplex

Item # MPUM214279
$159.95 $99.99
(You save $59.96)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
Airplane
UPC:
4041033062791
Multiplex Twin Star II Kit MPUM214279

More information about Multiplex Twin Star II Kit MPUM214279

This is a Multiplex Twin Star II Kit, updated with a streamlined design and molded from ELAPOR foam. This kit features a two piece wing and two PERMAX speed 400 motors.

Includes: Elapor foam fuselage and wing halves, pushrods, hardware package, tail section, decals, photo-illustrated instructions

Requires:

  • Electronic Speed Control: 17-27A
  • Motors: Two brushless PERMAX BL-O 2830-1100, Multiplex make a Power Set #33 2619 that has the recommended motors, ESCs and propellers (not carried)
  • Battery: 2S 2100-2500mAh LiPo
  • Charger: Timed or peak
  • Propellers: Two 9x6
  • Radio: 4-Channel
  • Servos: Four micro (2-ailerons, 1-elevator, 1-rudder)
  • Two Servo Extensions 12 (305mm): For aileron servos
  • Y-Harness: For aileron servos
  • Building and Field Equipment: Medium CA glue, activator, tools


Note: This model is NOT made of Styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.

  • Construction: Elapor foam
  • Wings: Two-piece foam with GRP tubular wing joiner
  • Radio Compartment: Easily accessible under wing
  • Landing Gear: None, model is intended for hand launches and belly landings
  • Aileron Control: Dual Servo
  • Hardware: Control horns, rods and all mounting hardware included
  • Motor Mount: Wing mounted plastic motor brackets

Wingspan: 56" (1420mm)

Wing Area: 665 sq/in (43 sq/dm)

Weight: 53oz (1500g)

Wing Loading: 11.5oz. sq/ft (35g sq/dm)

Length: 43" (1085mm)

Airfoil: Semi-symmetrical, high wing

Center of Gravity: 3.3" (85mm) from the wing's leading edge at the fuselage sides

Control Throws

Ailerons: Up +0.71" (+18mm) & Down -0.39" (-10mm)

Elevator: Up +0.94" (+24mm) & Down -0.59" (-15mm)

Rudder: Right & Left 0.79" (20mm) each side