Arrma Kraton 1/8 4WD Speed Monster RTR ARAARAD81**

Arrma

Item # ARAARAD81 1
$799.99 $429.99
(You save $370.00)
Status: In Stock
Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/8
Skill Level:
Skill Level 1
Vehicle Type:
Monster Truck
Arrma Kraton 1/8 4WD Speed Monster RTR ARAARAD81**

More information about Arrma Kraton 1/8 4WD Speed Monster RTR ARAARAD81**

 

This is the Electric Powered, 2.4GHz Radio Controlled 1/8th scale Kraton Speed Truck from ARRMA. Loaded with a waterproof 180A ESC, BLX 2050kv Brushless Motor, ADS-15M waterproof Metal-Geared Steering Servo, super-tough composite parts for long-lasting durability, precision fit red anodized aluminum accessories for head-turning looks and easy servicing. Equipped with ATX-100 2.4Ghz Radio Transmitter and ARX-100 Radio Receiver, housed in a protective waterproof box.

Harness the 6S LiPo Battery power and attack any terrain with a Speed Monster Truck that is equipped for the rough stuff, straight from the kit box! A Ready-to-Run specification that will smash previous limitations.

Includes:

  • RTR Kraton 6S BLX Speed Truck with Painted Body
  • 2.4GHz Radio
  • Waterproof Steering Servo and Receiver Box
  • BLX185 ESC
  • 2050Kv Brushless Motor
  • Instruction Manual
  • Two XT90 Battery Connectors
  • Bridging Wire for single pack use

Requires:

  • Two 2-3S 5000mAh 35C minimum LiPo battery with XT90 connector, Duratrax 11.1V 5000mAh 35C batteries recommended, or one 4-6S LiPo battery
  • Four AA batteries for transmitter
  • Battery charger to match selected battery
  • LiPo charging sack
  • Building & track equipment
  • Chassis: 0.12" (3mm) thick aluminum, black in color
  • Drive: Four wheel with CVD drive shafts
  • Radio: Tactic TTX300 2.4GHz 2-channel with ADS-15M waterproof steering servo, 208oz/in (15kg/cm) torque
  • Motor: BLX4074 2050Kv 4-pole brushless
  • ESC: Waterproof BLX185 150A 6S with built-in cooling fan, and male XT90 connector
  • Shocks: 16mm red anodized aluminum body, oil filled
  • Shock Towers: 0.20" (5mm) thick aluminum, black in color
  • Suspension: Pivot ball with anti-roll bar
  • Differentials: Three metal gear
  • Roll Cage: Composite internal
  • Body: Trimmed and painted polycarbonate, nylon rear wing
  • Motor Mount: Aluminum
  • Battery Holder: Adjustable hook and loop straps, holds two 2S, or two 3S LiPo cells
  • Tires: dBoots Minokawa, width: 3.3" (85mm), diameter: 6.2" (157mm)
  • Wheels: Five split spoke, black in color 17mm hex, diameter: 3.8" (97mm), width 2.6" (66mm)
  • Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

Vehicle
Length: 24 in (590mm)
Width: 18.5 in (470mm)
Height: 7.5 in (195mm)
Wheelbase:14.9 (378mm)
Ground Clearance: 1.3 in (33mm)
Weight: 177oz (5kg)
Maximum Battery Tray Dimensions: 6.2 x 2.0 x 1.8" (158 x 51 x 46mm)

Body
Length: 18.6" (472mm)
Width: 8" (203mm) behind front wheels, narrowest point
Width: 10.03" (255mm) at rear wheels, widest point
Height: 6.25" (159mm)