Associated Trophy Rat 2WD Brushless LiPo Combo RTR ASC70019C

Associated

https://www.rcplanet.com/rc-vehicles/car-truck/associated-trophy-rat-2wd-brushless-lipo-combo-rtr-asc70019c/
$539.99 $359.97
(You save $180.02)
Status: In Stock
(No reviews yet)
UPC:
784695985766

Item # ASC70019C

Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 1
Vehicle Type:
Short Course
Fits Model:
Associated Trophy Rat
More information about Associated Trophy Rat 2WD Brushless LiPo Combo RTR ASC70019C

This is the 1/10 scale brushless electric powered, 2.4GHz radio controlled, ready to run Trophy Rat truck from Team Associated.

Includes:

  • Ready to run Trophy Rat truck with brushless motor
  • 2.4GHz radio with DVC receiver
  • ESC
  • Trimmed body with head and taillights
  • LiPo battery
  • Charger
  • Instruction manual

Requires:

  • Four AA batteries for transmitter
  • LiPo charging bag
  • Track equipment
  • Chassis: Low center-of-gravity design, molded composite chassis with hook and loop battery straps that accommodate NiMH and 2-3S LiPo packs
  • Drive: Rear wheel with 81mm CVA driveshafts
  • Differential: Heavy duty sealed gear type with externally adjustable V2 slipper clutch
  • Brushless Motor: Reedy 3300Kv
  • Radio: XP 2.4GHz with DVC (Dynamic Vehicle Control) receiver with built-in adjustable gyro that allows vehicle stability to be adjusted to flow with the terrain, enclosed water-resistant receiver box
  • Steering Servo: Reedy metal-gear high-torque digital
  • Electronic Speed Control: Reedy water-resistant with high-current T-plug and LiPo low voltage cut off
  • Battery: Reedy 7.4V LiPo with T-plug
  • Battery Charger: Reedy compact balance charger
  • Suspension: Fully adjustable geometry with vertical ball ends for front and rear roll center adjustments
  • Shocks: V2 12mm big bore coil-over with blue anodized aluminum bodies
  • Body: Factory finished, based on the Northrup Fabrication "Trophy Rat" integrated LED lights, two front and two rear
  • Tires: High traction racing compound
  • Wheels: Method wheels with 12mm hex, matte black in color
  • Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Ball Bearings: Fourteen rubber sealed

Vehicle
Length: 18.94" (481mm)
Width: 11.1" (282mm)
Weight: 4.04lbs (1834g)
Wheelbase: 12.68" (322mm)
Gearbox Ratio: 2.6:1

You Might Also Like...

You Might Also Like...

Overview

More information about Associated Trophy Rat 2WD Brushless LiPo Combo RTR ASC70019C

This is the 1/10 scale brushless electric powered, 2.4GHz radio controlled, ready to run Trophy Rat truck from Team Associated.

Includes:

  • Ready to run Trophy Rat truck with brushless motor
  • 2.4GHz radio with DVC receiver
  • ESC
  • Trimmed body with head and taillights
  • LiPo battery
  • Charger
  • Instruction manual

Requires:

  • Four AA batteries for transmitter
  • LiPo charging bag
  • Track equipment
  • Chassis: Low center-of-gravity design, molded composite chassis with hook and loop battery straps that accommodate NiMH and 2-3S LiPo packs
  • Drive: Rear wheel with 81mm CVA driveshafts
  • Differential: Heavy duty sealed gear type with externally adjustable V2 slipper clutch
  • Brushless Motor: Reedy 3300Kv
  • Radio: XP 2.4GHz with DVC (Dynamic Vehicle Control) receiver with built-in adjustable gyro that allows vehicle stability to be adjusted to flow with the terrain, enclosed water-resistant receiver box
  • Steering Servo: Reedy metal-gear high-torque digital
  • Electronic Speed Control: Reedy water-resistant with high-current T-plug and LiPo low voltage cut off
  • Battery: Reedy 7.4V LiPo with T-plug
  • Battery Charger: Reedy compact balance charger
  • Suspension: Fully adjustable geometry with vertical ball ends for front and rear roll center adjustments
  • Shocks: V2 12mm big bore coil-over with blue anodized aluminum bodies
  • Body: Factory finished, based on the Northrup Fabrication "Trophy Rat" integrated LED lights, two front and two rear
  • Tires: High traction racing compound
  • Wheels: Method wheels with 12mm hex, matte black in color
  • Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Ball Bearings: Fourteen rubber sealed

Vehicle
Length: 18.94" (481mm)
Width: 11.1" (282mm)
Weight: 4.04lbs (1834g)
Wheelbase: 12.68" (322mm)
Gearbox Ratio: 2.6:1

Product Videos

Product Questions