Axial 1/10 Wraith Jeep Wrangler Poison Spyder 4WD RTR AXIAX90031

Axial

$745.00 $399.99
(You save $345.01)
Status: In Stock
(No reviews yet)
UPC:
816874011987

Item # AXIAX90031

Scale:
1/10
Skill Level:
Skill Level 1
Vehicle Type:
Rock Crawler
Power Type:
Electric Power
Build Type:
Ready to Run
More information about Axial 1/10 Wraith Jeep Wrangler Poison Spyder 4WD RTR AXIAX90031
 

This is the Axial 1/10 Wraith Jeep Wrangler Poison Spyder 4WD ready-to-run rock crawler. Produced through the cooperation of three of the best brands in off roading, Jeep, Poison Spyder and Axial, this Wraith comes ready to rip across the desert, climb rocks and go anywhere you direct it. A heavy duty 20T motor gives it punishing speeds on the flat and lockable differentials, huge officially-licensed tires and specialized suspension give it near unlimited rock crawling ability. Going where others fear to tread is just what this beast does. Question is: are you going with it?

  • Fully-assembled truck
  • Heavy-duty lockable gear differential with adjustable slipper clutch High-performance competition shocks
  • Powerful 20T motor AE-2 ESC with drag brake 2.4GHz 2-channel radio
  • Trail Ready™ beadlock wheels
  • Officially-licensed BF Goodrich® Krawler™ Tires
  • Full tube frame composite chassis
  • Protective radio box and transmission cover XP 2.4GHz 2-channel pistol grip radio 4-link front and rear suspension
  • WB8ª Wild Boar driveshafts

Includes:

  • RTR Jeep Wrangler Wraith-Poison Spyder
  • 2.4GHz Radio
  • Motor
  • ESC
  • Instructions

Requires:
Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: For selected battery type
AA Batteries: Four for transmitter

Chassis: Full tube composite chassis.
Drive: Four wheel with locked differentials and offset pumpkin for more ground clearance and a better driveshaft angle, AR60 OCP-Axle constructed from high strength, low flex composite material, axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area.
Radio: AX-3 2.4GHz 2-channel with steering and throttle trim and reverse.
ESC: AE-2 with LiPo cutoff, drag brake, Tamiya connector, and is programmable with the Castle Link programmer (not included).
Motor: 20 turn
Body: Officially licensed Jeep Wrangler body with Poison Spyder graphics, complete interior with seats, dashboard, steering wheel, and center console.
Battery Tray: Sized for standard stick pack and LiPo packs up to 1.8x5.9x1.1" (47x150x28mm) in size.
Suspension: True four link
Shocks: Composite body , oil filled
Wheels: Officially licensed Trail Ready HD series beadlock, wheels mount to any Axial Wraith, AX10 Ridgecrest or SCX10.
Tires: BFGoodrich Krawler T/A KX
Warranty: One year bumper to bumper limited. Axial's warranty center Hobby Services will repair or replace any incorrectly made part. Proof of purchase is required for Axial to honor any warranty claim. Axial reserves the right to change or modify this warranty without notice. This warranty does not cover damages due to normal
wear and tear, users' failure to perform routine maintenance, user error of assembly or installation, modifications, misuse, crash damage, or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the warranty and prevent support and service. Repair or replacement of the product by Hobby Services is the sole and exclusive remedy for any loss or damages.


Wheelbase: 13.98" (355mm)
Ground Clearance: 2.8" (71.6mm)
Height: 9.1" (232mm)
Width: 11.22" (285mm)
Length: 19.25" (489mm)
Weight: 5.45lbs (2.47kg)

You Might Also Like...

You Might Also Like...

Overview

More information about Axial 1/10 Wraith Jeep Wrangler Poison Spyder 4WD RTR AXIAX90031
 

This is the Axial 1/10 Wraith Jeep Wrangler Poison Spyder 4WD ready-to-run rock crawler. Produced through the cooperation of three of the best brands in off roading, Jeep, Poison Spyder and Axial, this Wraith comes ready to rip across the desert, climb rocks and go anywhere you direct it. A heavy duty 20T motor gives it punishing speeds on the flat and lockable differentials, huge officially-licensed tires and specialized suspension give it near unlimited rock crawling ability. Going where others fear to tread is just what this beast does. Question is: are you going with it?

  • Fully-assembled truck
  • Heavy-duty lockable gear differential with adjustable slipper clutch High-performance competition shocks
  • Powerful 20T motor AE-2 ESC with drag brake 2.4GHz 2-channel radio
  • Trail Ready™ beadlock wheels
  • Officially-licensed BF Goodrich® Krawler™ Tires
  • Full tube frame composite chassis
  • Protective radio box and transmission cover XP 2.4GHz 2-channel pistol grip radio 4-link front and rear suspension
  • WB8ª Wild Boar driveshafts

Includes:

  • RTR Jeep Wrangler Wraith-Poison Spyder
  • 2.4GHz Radio
  • Motor
  • ESC
  • Instructions

Requires:
Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: For selected battery type
AA Batteries: Four for transmitter

Chassis: Full tube composite chassis.
Drive: Four wheel with locked differentials and offset pumpkin for more ground clearance and a better driveshaft angle, AR60 OCP-Axle constructed from high strength, low flex composite material, axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area.
Radio: AX-3 2.4GHz 2-channel with steering and throttle trim and reverse.
ESC: AE-2 with LiPo cutoff, drag brake, Tamiya connector, and is programmable with the Castle Link programmer (not included).
Motor: 20 turn
Body: Officially licensed Jeep Wrangler body with Poison Spyder graphics, complete interior with seats, dashboard, steering wheel, and center console.
Battery Tray: Sized for standard stick pack and LiPo packs up to 1.8x5.9x1.1" (47x150x28mm) in size.
Suspension: True four link
Shocks: Composite body , oil filled
Wheels: Officially licensed Trail Ready HD series beadlock, wheels mount to any Axial Wraith, AX10 Ridgecrest or SCX10.
Tires: BFGoodrich Krawler T/A KX
Warranty: One year bumper to bumper limited. Axial's warranty center Hobby Services will repair or replace any incorrectly made part. Proof of purchase is required for Axial to honor any warranty claim. Axial reserves the right to change or modify this warranty without notice. This warranty does not cover damages due to normal
wear and tear, users' failure to perform routine maintenance, user error of assembly or installation, modifications, misuse, crash damage, or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the warranty and prevent support and service. Repair or replacement of the product by Hobby Services is the sole and exclusive remedy for any loss or damages.


Wheelbase: 13.98" (355mm)
Ground Clearance: 2.8" (71.6mm)
Height: 9.1" (232mm)
Width: 11.22" (285mm)
Length: 19.25" (489mm)
Weight: 5.45lbs (2.47kg)

Product Videos

Product Questions