Dromida 1/18 Scale Brushless Touring Car 2.4GHz RTR DIDC0074

Dromida

Item # DIDC0074
$219.99 $149.99
(You save $70.00)
Status: In Stock
Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/18
Skill Level:
Skill Level 1
Vehicle Type:
On-Road Car
UPC:
707768200740
Availability:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Dromida 1/18 Scale Brushless Touring Car 2.4GHz RTR DIDC0074

More information about Dromida 1/18 Scale Brushless Touring Car 2.4GHz RTR DIDC0074

 

This is the Dromida 1/18 scale 2.4GHz brushless Touring Car RTR. Get behind the wheel of Dromida's new brushless Touring Car. Powered by an energetic 5300kV brushless motor that provides smooth torque and blistering speeds, and with LiPo compatibility (LiPo battery sold separately), you can boost this vehicle's performance even further!

Thanks to this car's 4WD drivetrain, low center of gravity suspension setup, and high-grip tires, you'll be able to corner like you've been doing it for years. Front impact damage is reduced by the foam front bumper, and this vehicle includes everything you need to start racing right away - even a 2.4GHz radio, NiMH battery, and a charger!

Includes:
1x Assembled Vehicle
1x Printed and Decaled Body
1x 5300kV Brushless Motor
1x RX18 Receiver/Speed Control
1x DS100 Steering Servo
1x D100 2.4GHz Radio System
1x Rechargeable NiMH Battery
1x 100-240V AC Charger w/ International Plug Adapters
4x AA Batteries

Chassis: Plastic, extended length with countersunk screw holes
Drive: Four wheel
Differentials: Gear type
Motor: 5300Kv brushless
Radio: 2-channel 2.4GHz Dromida D100, waterproof ESC/receiver with push button linking, steering and throttle trim and dual rate, battery monitoring LED
Steering Servo: Waterproof DS100 servo
Battery: 6-cell 1300mAh NiMH
Battery Charger: 100-240V AC powered with international plug inserts
Body: Polycarbonate touring car, trimmed, printed and decaled
Front Bumper: Foam
Shocks: Plastic body, oil-filled
Tires: Treaded rubber, high traction with foam inserts
Wheels: Plastic
Ball Bearings: Full set included
Caster: Non-adjustable
Camber: Non-Adjustable
Length: 11.1" (282mm)
Width: 5.1" (130mm)
Height: 3.6" (92mm)
Weight with Battery: 1.27lb (580g)
Wheelbase: 6.7" (170mm)

You Might Also Like...