HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5 HPI115126

HPI Racing

Item # HPI115126
$410.00 $259.99
(You save $150.01)
Status: In Stock
Build Type:
Ready to Run
Power Type:
Electric Power
Skill Level:
Skill Level 1
Vehicle Type:
On-Road Car
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5 HPI115126

More information about HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5 HPI115126


This is the HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5. Introducing the brand new HPI Racing 2015 Ford Mustang RTR Spec 5 RS4 Sport 3! Bringing the awesomeness of Vaughn Gittin Jr’s RTR Spec 5 into your hands in 1/10th scale RC form, the latest RS4 Sport 3 kit is ready to rock your RC world! The super realistic Ford Mustang RTR Spec 5 body is coupled with a set of replica HRE Tech 7 wheels for over the top scale realism. Under the hood, this 1/10th scale Mustang is equipped with the latest HPI Racing Touring Car chassis, the RS4 Sport 3. With full-time shaft driven 4WD, a fully sealed drivetrain, waterproof 2.4 GHz electronics/radio gear, fully independent double wishbone suspension and adjustable oil filled shocks it’s Ready to Rock in any condition.


  • HPI RS4 Sport 3 On-Road Car with 2015 Mustang Body
  • Battery
  • Charger
  • Radio
  • ESC
  • Motor
  • Four AA Batteries
  • Instructions
  • 27T Pinion Gear
  • 75T Spur Gear

 Requires: Track and maintenance equipment

  • Chassis: Plastic
  • Drive: Fully enclosed four wheel shaft
  • Radio: HPI TF-11 2.4GHz
  • Motor: HPI 15T Firebolt, longitudinally mounted
  • Electronic Speed Control: Waterproof SC-3SWP2
  • Differentials: Sealed metal gear, capable of handling brushless power
  • Body: Ford Mustang Spec 5 trimmed and painted with all sponsor decals applied
  • Shocks: Composite body, oil filled
  • Suspension: Double wishbone
  • Wheels: Neon green composite plastic, width: 1.02" (26mm), diameter 1.9" (48mm)
  • Tires: Treaded rubber
  • Ball Bearings: Complete set
  • Battery: HPI Plazma 7.2V NiMH 2000mAh with standard connector
  • Battery Charger: AC powered wall type
  • Battery Compartment: Holds standard LiPos and up to 7-cell NiMH batteries, adjustable for extra traction or increased steering, thick hook and loop straps hold battery in place
  • Front Bumper: Foam
  • Pinion Gear: Steel, 48P 27 tooth
  • Spur Gear: Molded plastic, 48P 75 tooth
  • Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Warranty (by the manufacturer): 2-year limited through manufacturer, valid only in USA, Canada and South America

Length: 16.9" (430mm)
Width: 7.4" (190mm)
Height: 4.9" (125mm)
Wheelbase: 10" (255mm)

Length: 17" (432mm)
Width: 7.7" (198mm) behind front wheels-narrowest point, 8.1" (207mm) at rear wheels-widest point
Height: 4.7" (120mm)

You Might Also Like...