HPI Trophy Buggy Flux RTR HPI107016

HPI Racing

https://www.rcplanet.com/rc-vehicles/car-truck/hpi-trophy-buggy-flux-rtr-hpi107016/
$819.00 $459.99
(You save $359.01)
Status: Out of stock
Availability: ARRIVES BEFORE CHRISTMAS
UPC:
4944258009230
Availability:
ARRIVES BEFORE CHRISTMAS

Item # HPI107016

Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/8
Skill Level:
Skill Level 1
Vehicle Type:
Buggy
Fits Model:
HPI Trophy Flux Buggy
More information about HPI Trophy Buggy Flux RTR HPI107016
 

This is the HPI Trophy Flux 1/8 Scale 4WD Electric Buggy Racer RTR. The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that it's fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price!

Fully assembled right out of the box and fitted with a no-hassle HPI 2.4GHz radio system, the Trophy Buggy Flux is ready for you to drop in two 2S LiPo batteries for 14.4 volts of ground-crushing fun! Go brushless with the Trophy Buggy Flux!

Includes:

  • HPI On-Road Sprint 2 Touring Car with the BMW M3 GT-2 Body
  • Flux Vapor ESC
  • Flux Vektor 5900kV brushless motor
  • Body
  • Wing
  • 4 AA TX batteries
  • 2.4GHz radio with waterproof steering servo
  • Decal sheet
  • Instruction manual

Requires:

  • 7.2V NiMH battery stick pack with Dean's connector
  • Battery charger to match selected battery
  • Building and track equipment
  • Chassis: 3/16" (4mm) plastic
  • Drive: Four-wheel belt drive
  • Motor: HPI Flux Vektor 5900kV brushless (not 3S LiPo compatible)
  • Radio: 2-channel 2.4GHz, SF-10W waterproof steering servo and four AA transmitter batteries
  • Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible and fully programmable with the USB Programming Kit (not included)
  • Ball Bearings: Full set, rubber sealed
  • Shocks: Oil-filled, plastic bodied
  • Differentials: Planetary gear, sealed
  • Transmission: Single speed with Flux optimized gearing
  • Tires: HPI X-Pattern Racing Tire 1.02" (26mm) width, 1.9 (49mm) diameter; Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
  • Wheels: Rays Volk TE37 six spoke black 1.9" (48mm) diameter, 1.02" (26mm) wide
  • Pinion Gear: Steel 48 pitch
  • Spur Gear: 48 pitch, composite construction
  • Body: Polycarbonate painted and trimmed with body trim and light details and clear plastic windows, matte black finish rear wing
  • Bumpers: Front, foam
  • Suspension: Fully adjustable, extra-long upper links with new multiple mounting positions, and adjustable droop
  • Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering: Bearing supported bell-crank type with servo saver

VEHICLE
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10" (254mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)

BODY
Length: 17.4" (442mm)
Width: 7.5" (190mm)
Height: 4.6" (117mm)

You Might Also Like...

You Might Also Like...

Overview

More information about HPI Trophy Buggy Flux RTR HPI107016
 

This is the HPI Trophy Flux 1/8 Scale 4WD Electric Buggy Racer RTR. The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that it's fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price!

Fully assembled right out of the box and fitted with a no-hassle HPI 2.4GHz radio system, the Trophy Buggy Flux is ready for you to drop in two 2S LiPo batteries for 14.4 volts of ground-crushing fun! Go brushless with the Trophy Buggy Flux!

Includes:

  • HPI On-Road Sprint 2 Touring Car with the BMW M3 GT-2 Body
  • Flux Vapor ESC
  • Flux Vektor 5900kV brushless motor
  • Body
  • Wing
  • 4 AA TX batteries
  • 2.4GHz radio with waterproof steering servo
  • Decal sheet
  • Instruction manual

Requires:

  • 7.2V NiMH battery stick pack with Dean's connector
  • Battery charger to match selected battery
  • Building and track equipment
  • Chassis: 3/16" (4mm) plastic
  • Drive: Four-wheel belt drive
  • Motor: HPI Flux Vektor 5900kV brushless (not 3S LiPo compatible)
  • Radio: 2-channel 2.4GHz, SF-10W waterproof steering servo and four AA transmitter batteries
  • Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible and fully programmable with the USB Programming Kit (not included)
  • Ball Bearings: Full set, rubber sealed
  • Shocks: Oil-filled, plastic bodied
  • Differentials: Planetary gear, sealed
  • Transmission: Single speed with Flux optimized gearing
  • Tires: HPI X-Pattern Racing Tire 1.02" (26mm) width, 1.9 (49mm) diameter; Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
  • Wheels: Rays Volk TE37 six spoke black 1.9" (48mm) diameter, 1.02" (26mm) wide
  • Pinion Gear: Steel 48 pitch
  • Spur Gear: 48 pitch, composite construction
  • Body: Polycarbonate painted and trimmed with body trim and light details and clear plastic windows, matte black finish rear wing
  • Bumpers: Front, foam
  • Suspension: Fully adjustable, extra-long upper links with new multiple mounting positions, and adjustable droop
  • Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering: Bearing supported bell-crank type with servo saver

VEHICLE
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10" (254mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)

BODY
Length: 17.4" (442mm)
Width: 7.5" (190mm)
Height: 4.6" (117mm)

Product Videos

Reviews

  • 2
    bad parts

    Posted by grizz on Jul 14th 2017

    bad parts

  • 3
    Steering knuckle

    Posted by Anonymous on Jul 14th 2017

    Steering knuckle

  • 5
    purchases and product

    Posted by albert concepcion on Jul 14th 2017

    everything that i order come on time and no damages so i'm happy with rcplanet love the trophy buggy flux

  • 5
    HPI Trophy Buggy Flux

    Posted by Charles Levac on Jul 14th 2017

    HPI Trophy Buggy Flux

  • 5
    Perfect

    Posted by Jay G on Jul 14th 2017

    Perfect

  • 5
    OFF ROAD

    Posted by ANDRE on May 22nd 2017

    GREAT BUGGY TO OWN AND VERY STURDY TAKES TURNS VERY WELL AS LONG AS YOUR NOT AT TOP SPEED. HARD TO BREAK AND TAKES A PRETTY GOOD BEATING. SO FAR ONLY BROKE A HUB CARRIER $5 FIX AND I WAS BACK UP AND RUNNING. LOADS OF FUN

Product Questions