HPI Trophy Truggy Flux RTR HPI107018

HPI Racing

Item # HPI107018
$879.00 $489.99
(You save $389.01)
Status: Out of stock
Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/8
Skill Level:
Skill Level 1
Vehicle Type:
Truggy
UPC:
4944258009292
Availability:
<span><b>Sandy, UT</span><br/><span style="color: rgb(255,0,0);">Available Online Only</b></span>
HPI Trophy Truggy Flux RTR HPI107018

More information about HPI Trophy Truggy Flux RTR HPI107018

 

Get right into plug-and-go truggy action with the RTR Trophy Truggy Flux! This amazing off-road 4WD vehicle will thrill you with its jaw-dropping top speed, racing design and wild stunt action! Always a popular kit in its Nitro version, the Trophy Truggy has seen it all when it comes to burly stunts, and with the awesome power of a purpose-designed brushless system it is able to pull off the same tricks and as the Nitro version - but without the noise and fumes! The Trophy Truggy Flux is completely painted and assembled for you, fitted with a no-crystal HPI 2.4GHz radio system and ready for you to add two 2S LiPo batteries! You'll get to experience 14.4 volts of monster power driving 1965KV of brushless power!

2.4GHz RADIO SYSTEM
Ready-built right out of the box and fitted with an all-new 2.4GHz radio system, the Trophy Truggy Flux is the perfect introduction to serious 1/8th off-road truggies! No need to worry about changing crystals, the radio prevents frequency conflicts automatically. If the car ever loses radio signal or battery power, an electronic failsafe will bring it to a safe and controlled stop. You get big-air fun and race-track performance in one easy RTR package! If you're looking for a powerful, versatile and FAST brushless system, you don't have to look any further than the combination of the HPI Flux Scream motor and Flux Rage speed controller!

The Flux Scream motor is the perfect match for the Rage speedo: with 1965KV of power, it was designed from the ground up to be bolted into 1/8th scale off-road vehicles to give you the explosion of power you want from any car or truck!

The Flux Rage is a monster of a speedo: able to handle twin 2S batteries for up to 4S (14.8 volt!) power, you will experience mind-bending top speeds and blindingly fast acceleration for huge stunts, massive jumps and burly maneuvers that will make your jaw drop!

Also, if you ever want to change your speedo settings, you'll be able to experiment easily with the#101280 2 in 1 Professional Program Card! You can change the amount of braking the speedo uses on the motor, reversing speed, motor timing and even the mode for accelerating smoothly in different traction conditions!

Formed from 4mm thick 6061 aluminum, the chassis of the Trophy Truggy Flux features angled sides and a huge vertical rear brace for phenomenal stiffness front-to-rear. The twin batteries fit'securely within an adjustable and padded battery box, held in place with two thick hook-and-loop strips so they won't move during jumps or crashes. The layout of the components within the chassis makes it easy to change batteries, and a breeze to do maintenance!

Suspension and Steering
The Trophy Truggy Flux uses a racing-derived suspension design that's perfect for racing, stunts, bashing - pretty much anything you want to do! The suspension has loads of features that are standard on all the top racing kits: extra-long suspension arms, aluminum steering knuckles, adjustable wheelbase and 17mm hex hubs.

For increased durability when hitting those big air highs and rough-and-tumble landings, the Trophy Truggy Flux uses hinge pin braces, captured rod end joints on the camber links and thick webbing on the plastic parts to resist breakages. Use the steel turnbuckles and variety of shock mount and camber link positions to tune your truck to your driving style, the track and the driving conditions!

HPI makes it as easy as possible to get into RC Off-Road action. The Trophy Truggy Flux is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - diffs, shocks, suspension and more are perfect before you even open the package. And with many top racing features already installed, you don't have to do a thing to get going fast! HPI Ready-To-Run vehicles bring you the same high performance and quality that you'd expect from a high end RC kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC truck straight from the box!

The bodyshell on the Trophy Truggy Flux features a hot new multi-colour paint scheme designed by Jon Miller from RCS Graphicworx. Just like all HPI cars and trucks, you get a full, in-depth instruction manual with step-by-step instructions that allow you to easily disassemble and reassemble your truck for maintenance and easy servicing. The manual also includes a handy parts list and full-scale drawings of the parts and hardware. And the included HPI RC Car DVD is your personal RC car expert in a box!

Includes:

  • RTR 1/8 scale Trophy Flux Truggy Racer with Brushless Motor
  • ESC
  • Body
  • Rear Wing
  • Decals
  • 2-channel 2.4GHz Radio
  • Four AA Batteries
  • Instructions

Requires:

  • Two 2S LiPo batteries with Deans plugs
  • Battery charger for selected batteries
  • Maintenance and track equipment
  • Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal rod braces
  • Drive: Four-wheel shaft, with steel outdrives and axles
  • Motor: Flux Scream brushless 1965kV
  • ESC: Flux Rage, handles two 2S batteries for up to 4S (14.8V) of power
  • Radio: 2.4GHz 2-channel
  • Radio Tray: Low profile aluminum
  • Differentials: Bevel Gear type with four internal gears for increased durability
  • Shocks: Oil-filled
  • Shock Towers: 6061 aluminum
  • Suspension: Extra-long arms for greater stability and thick suspension pins for greater resistance against crash damage
  • Steering: Bellcrank type with cast aluminum knuckles and servo saver
  • Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V
  • Body: Painted and trimmed with multicolor paint scheme designed by Jon Miller from RCS Graphicworx
  • Bumpers: Front
  • Wheels: Seven spoke, zero offset
  • Tires: HPI Shredder Block
  • Ball Bearings: Full set
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

Vehicle
Length: 22.8" (580mm)
Width: 15.9" (405mm)
Height: 7.1" (180mm)
Track: 14.4" (365mm) edges of tires side-to-side
Wheelbase: 14.4" (365mm)

Body
Length: 18.3" (464mm)
Width: 7.9" (200mm)
Height: 5" (127mm)

You Might Also Like...