Losi 22-4 2.0 Race Kit 1/10 4WD Buggy TLR03007

Team Losi Racing

Item # TLR03007
$459.99 $399.99
(You save $60.00)
Status: In Stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 4
Vehicle Type:
Buggy
UPC:
605482621585
Losi 22-4 2.0 Race Kit 1/10 4WD Buggy TLR03007

More information about Losi 22-4 2.0 Race Kit 1/10 4WD Buggy TLR03007

 

This is the Losi 22-4 2.0 1/10 scale 4WD buggy race kit. Since its debut, the original 22-4 buggy has been winning races all over the world. Version 2.0 adds refinements to this successful platform that make it easier to drive and maintain.

Gear Differentials
The all-new, low maintenance gear differentials are designed narrow, so there is no need to compromise the inner pivot or roll center widths. Besides providing improved performance on all types of surfaces, the gear diffs can be accurately and consistently tuned using diff fluid. Their cases are machined from 7075-T6 aluminum but they do not weigh any more than stock ball diffs.

Optimized Suspension Geometry
Converting to the 22™ off-set, rear-hub geometry has widened the rear track width, creating more stability in the rear end so racers can push the car harder with confidence. The 22 rear hub is paired with a vertical-mount, rear-camber block. This provides multiple adjustments that allow the rear roll center to be optimized for any conditions.

Multiple Battery Configurations
The chassis and mud guard are designed to accommodate a variety of battery configurations. A shorty pack can be mounted forward or backward on the left side of the chassis using the molded locator. Saddle packs can be mounted with one half on each side of the chassis. When using a saddle pack, the left side can be moved fore or aft to adjust weight bias.

Popular Tuning Parts Included
The kit comes standard with 12.5° aluminum caster blocks, a 2.5°rear toe plate, a pink rear sway bar, a vertical-ball stud rear camber block, front and rear CVAs and a cab-forward body. These parts maximize the buggy's performance by improving stability, balance and adjustability.

Split Belt Covers
The center belt cover can now be removed without having to remove the rear belt cover, making drivetrain maintenance quicker and easier.

CVA Driveshafts
This popular tuning option for the original 22-4 buggy is now included with the 2.0. The CVAs lock up under acceleration and keep the car flatter, especially during hard acceleration.

Lightweight 2.5mm 7075-T6 Aluminum Chassis
The aluminum main chassis plate has been CNC machined for optimal fit and flex. Milled pockets in the chassis reduce weight, including an open pocket under the motor that reduces temps.

Centralized Forward Motor Placement
The 3-belt drive train allows for the motor to be mounted directly in the center of the chassis, and towards the front. This motor placement is optimized and gives the 22-4 2.0 a unique balance that is a dream to drive.

Requires:

  • Motor 
  • Electronic Speed Control 
  • Servo 
  • Tires 
  • Radio System 
  • Pinion Gear 
  • Charger 
  • Battery 
  • Gear differentials
  • Revised suspension geometry
  • Multiple battery mounting configurations
  • Popular tuning parts included
  • Split belt covers for easier maintenance
  • Lightweight 2.5mm 7075-T6 aluminum chassis
  • CVA driveshafts
  • Mid-motor design
  • Cab-forward body with adjustable wing

Type: Race Kit
Scale: 1/10
Length: 16.5 in (419.1mm)
Width: 9.41 in (239.0mm)
Height: 6.50 in (165.1mm)
Ground Clearance: Adjustable
Wheelbase: 11.10 in (282.3mm)
Weight: Varies with Equipment
Chassis: 2.5mm Plate, 7075-T6
Suspension: Four Wheel Independent
Drivetrain: 4WD
Motor or Engine: Not Included
Speed Control: Not Included
Radio: Not Included
Servos: Not Included
Batteries: Not Included
Charger: Not Included
Gear Pitch: 48-pitch
Wheel Size: 2.2" (55.9mm)
Kit/RTR: Kit
Shock Type: Coilover, Oil Filled
Body: 1.0mm Polycarbonate, Clear
Ball Bearings: Full
Experience Level: Advanced
Recommended Environment: Indoor/Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes