Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR LOS04011

Losi

Item # LOS04011
$719.99 $399.99
(You save $320.00)
Status: In Stock
Build Type:
Ready to Run
Power Type:
Nitro Power
Scale:
1/8
Skill Level:
Skill Level 4
Vehicle Type:
Truggy
UPC:
605482176245
Availability:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR LOS04011

More information about Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR LOS04011

 

This is the 8IGHT-T Nitro 1/8 scale 4WD truggy that's RTR. If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.

Requires:

  • 20–30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter

Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

  • Your fast track to nitro truggy racing
  • 4mm T-6 aluminum chassis plate
  • Spektrum ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Metal-gear transmission and sealed differentials
  • Pre-set suspension geometry
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum™ waterproof metal-gear servo
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Type: Nitro Truggy
Scale: 1/8
Length: 18.75 in (476mm)
Width: 16.38 in (416.1mm)
Height: 7.30 in (185.5mm)
Wheelbase: 14.93-15.09 in (379-383mm)
Chassis: 4mm Plate, Aluminum
Suspension: 4-wheel Independent
Drivetrain: 4WD
Tire Type: Losi XTT
Motor or Engine: Dynamite .28 Nitro Engine
Radio: DX2E
Servos: Included
Batteries: Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch: 1.0Mod
Kit/RTR: RTR
Shock Type: 15mm bore, Composite
Body: Painted/Screened
Ball Bearings: Full Precision Ball Bearings
Fuel Tank Capacity: 150cc
Experience Level: Beginner
Recommended Environment: Outdoor

You Might Also Like...