Mugen MBX7R ECO 1/8 Electric Buggy MUGE2016


Item # MUGE2016
$999.99 $549.99
(You save $450.00)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Mugen MBX7R ECO 1/8 Electric Buggy MUGE2016

More information about Mugen MBX7R ECO 1/8 Electric Buggy MUGE2016

This is the electric powered, radio controlled, 1/8 scale Mugen MBX7R ECO off-road buggy kit.
The changes from the original MBX7 ECO include:

  • New 16mm Shocks for better stability
  • Side angle of chassis changed to increase strength
  • Front axle position changed to trailing axle position
  • New steering Ackermann plate for better steering input
  • Shortened upper suspension arms for more camber adjustability
  • New front & rear drive train & universals for better performance on bumpy surfaces
  • New wing mounts increase rear traction & jumping abilities
  • Stronger heavy duty sliding motor mount


  • Mugen MBX7R-ECO off-road buggy kit with clear buggy body
  • Rear wing
  • Decal sheet
  • Window mask sheet
  • Battery/ESC tray
  • Spur and pinion gears
  • Illustrated instruction manual


  • 1/8 scale brushless motor
  • 1/8 scale brushless motor compatible ESC
  • 2-channel radio with high-torque servo for steering
  • 1/8 scale buggy tires, foam inserts, and wheels
  • Building and track equipment
  • Chassis: A7075 T6 aluminum 0.12" (3mm) thick
  • Drive: Four wheel three differential shaft drive
  • Shocks: 16mm oil filled with 3.5mm shock shafts, hard anodized aluminum bodies
  • Shock Towers: Front: 0.20" (5mm) thick A7075 aluminum, Rear: 0.16" (4mm) thick A7075 aluminum
  • Gearbox: Sealed, front and rear
  • Differentials: Planetary geared, straight cut conical gears
  • Motor Mount: Aluminum sliding type, heavy duty aluminum, anchored with 4mm screws for extra strength
  • Transmission: Single-speed
  • Ball Bearings: Full set
  • Battery Tray: Designed for two 2-cell LiPo batteries in a staggered mounting position, or a single 4 cell LiPo
  • Suspension: Pillow ball type with 0.20" (5mm) A7075 aluminum lower suspension mounts for optimized geometry
  • Body: Clear buggy type, cab forward design with raised sides for increased rear traction
  • Spur Gear: 44 Tooth plastic
  • Pinion Gear: 14T steel
  • Camber Tie Rods: Adjustable, Camber describes the angle at which the tires sit vertically, suspension arms shortened 1.6mm allowing more camber adjustment
  • Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which the tires point inward as viewed from above
  • Steering: Bell-crank type, with carbon graphite steering brace and adjustable Ackerman. Ackerman describes the effect of the inside front wheel turning faster than the outside front wheel during turns. Newly designed Ackerman plate improves steering input

Specs such as dimensions, weight, and wheelbase were not provided by manufacturer at the time of this writing


Length: 13" (330mm)
Width: 7.9" (200mm)
Height: 3.6" (92mm)

You Might Also Like...