Mugen MBX7TR 1/8 Nitro Truggy MUGE2019


Item # MUGE2019
$1,099.99 $679.99
(You save $420.00)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Nitro Power
Skill Level:
Skill Level 5
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Mugen MBX7TR 1/8 Nitro Truggy MUGE2019

More information about Mugen MBX7TR 1/8 Nitro Truggy MUGE2019


This is a Mugen MBX7TR 1/8 Nitro Truggy.

Includes: MBX7TR Truggy Kit, Clear Body, Rear Wing, Decals, Diff Oil, Air Filter and Instruction Manual


  • Radio: 2-channel with high-torque steering servo
  • Engine: .21-.28 cu in
  • Fuel, Glow Starter and Building and Track equipment
  • Receiver Battery: 4.8-7.4V flat or hump NiMH or 1600-2100 LiPo pack
  • Chassis: 0.12" (3mm) thick A7075 aluminum, hard anodized, increased side bends for greater durability
  • Drive: Four wheel shaft with new front and rear universal style driveshafts for better feel on bumpy surfaces
  • Transmission: Two speed, adjustable
  • Differentials: Oil-filled bevel gear
  • Shocks: Oil-filled 16mm diameter with 1.4mm springs that reduces chassis roll, increases traction, improves jumping and adds stability
  • Shock Towers: 0.157" (4mm) thick A7075 aluminum
  • Suspension: 0.196" (5mm) A7075 aluminum lower suspension mounts for optimized geometry, front and rear steel sway bars
  • Fuel Tank: 5.07oz (150cc)
  • Clutch: 13 tooth steel with three heavy duty aluminum shoes
  • Brake: Dual disc
  • Bumper: Front foam
  • Camber Tie Rods: Adjustable, Camber describes the angle at which the tires sit vertically
  • Body: Cab forward style, clear with black plastic rear wing
  • Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which the tires point inward as viewed from above
  • Ackermann: Adjustable, Ackermann refers to the inner front wheel rotating faster than the outer front wheel during turns

Width: 16.2" (413mm)
Weight: 7.9lbs (3600g)
Wheelbase: 14.7-14.9" (373-378mm)
Gear Ratio: 16.28:1

Length: 17.6" (447mm)
Width: 7.8" (198mm)
Height: 5.5" (113mm)

You Might Also Like...