RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body RC4Z-RTR0035

RC4WD

Item # RC4Z-RTR0035
$983.99 $799.99
(You save $184.00)
Status: Out of stock
Build Type:
Ready to Run
Power Type:
Electric Power
Vehicle Type:
Truck
Scale:
1/10
UPC:
812115029896
RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body RC4Z-RTR0035

More information about RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body RC4Z-RTR0035

 

This is the 2.4GHz Radio Controlled, RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body Set. Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow or mud than the TF2 RTR. Part scale truck, part adventurer, your TF2 RTR is ready for your mud kicking trail-loving lifestyle!

The TF2 RTR has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2 RTR. Performance of the TF2 is smooth with its TCI R4 Transmission, 4WD drivetrain, bulletproof transfer case and quality metal components throughout. The TF2 RTR is truly a work of art in both appearance and performance.

Every TF2 RTR is compatible with a full range of options and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 off-road truck... The TF2 RTR.

Includes:
1x RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body Set (Limited Edition)

Notes:
While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Do not over tighten screws, otherwise you may strip the thread

  • CNC machined billet aluminum ladder frame chassis
  • Leaf spring suspension
  • Scale shock hoops and chassis servo mounts and hard body mounts
  • Four wheel drive with heavy-duty Universal Joint shafts
  • TCI heavy-duty R4 single speed scale transmission
  • Realistic center mounted 4x4 transfer case
  • V8 scale engine mounted on transmission
  • RC4WD cast Yota Axles with round knuckles and lower mounting points
  • 540-size brushed 45-turn motor
  • Outcry II waterproof ESC
  • XR3 3-channel 2.4GHz pistol grip radio
  • Twister high-torque digital metal gear steering servo
  • Trimmed and painted hard plastic body
  • Dismountable roof
  • Chrome plated parts and colored lenses for all signal lights
  • 1.9" Prowler XS edition tires
  • Raceline Monster 1.9" beadlock wheels in black and silver
  • Superlift Superide 80mm shocks
  • 7.2V 6-cell 3000mAh NiMH

Wheelbase: 7.8" (200mm)
Width: 19.8" (503mm)
Height: 9.3" (237mm)
Ground Clearance: 2.4" (62mm)
Transmission Gear Ratio: 10.1:1
Final Drive Ratio: 31.9:1
Weight: 8.44lbs (3.83kg)
Tire Inner Diameter: 1.9" (48mm)
Tire Outer Diameter: 3.76" (95.5mm)
Wheel Width: 1.08" (27.5mm Wide)
Wheel Outer Diameter: 1.9" (48mm)