RJ Speed 24" Wheelbase Dragster 1/10 Dragster Kit RJS2003

RJ Speed

Item # RJS2003
$149.99 $94.99
(You save $55.00)
Status: In Stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
RJ Speed 24" Wheelbase Dragster 1/10 Dragster Kit RJS2003

More information about RJ Speed 24" Wheelbase Dragster 1/10 Dragster Kit RJS2003

This is the RJ Speed 1/10 Electric Powered, Radio Controlled, 2WD 24 Wheelbase Dragster Kit.

RJ Speed 24 Dragster Kit complete less electrics Consists of a 2 piece composite fiberglass chassis with a vertical stiffener. It has wagon wheel type steering and an adjustable pull rod suspension. The kit includes a solid rear axle, hubs, tires, gears, steering parts, and a clear lexan dragster body with wing.

Includes: One 24 Wheelbase Dragster Kit, mounted rear foam tires, front o-ring tires and wheels, 81 tooth spur gear (48P), 20 tooth pinion (48p), brass bushings, clear polycarbonate dragster body with window mask and wing and building instructions.


  • Radio: 2-Channel with 1 Servo (two servos required if you are going to be using a micro switch instead of a speed control. We do not stock a micro switch (25amp) that would work)
  • Radio Batteries: (8) AA size
  • Speed Control: electronic of modeler's choice
  • Motor: 550 size motor of modeler's choice
  • Battery: 6-cell stick or side-by-side with standard connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Paint: Polycarbonate paint of modeler's choice
  • Misc. Items: Building and track equipment
  • Chassis: Two piece composite fiberglass with vertical stiffener
  • Drive: Rear wheel drive
  • Brass bushings support the rear axle and front wheels
  • Suspension: Adjustable pull rod rear suspension
  • Gearbox: Open with rear pinion and spur gear
  • Differentials: No differential model has a solid rear axle
  • Tires: 1/10 scale foam pan car style on black rims on the rear and rubber o-ring style tires on black rims on the front
  • Wheels: Black plastic, multi-spoke on front and rear
  • Suspension: Adjustable pull rod type
  • Camber Tie Rods: Fixed
  • Steering Tie Rods: Adjustable
  • Servo Saver: Required for steering servo (NOT INCLUDED)

Length: 24" (609mm)
Wheelbase: 24" (609mm)
Gear Ratio: 4.05:1

Front: 1.5" diameter O-Ring style
Rear: 1/10 scale on-road foam style (4 bolt hub style)

Length: 24" (609mm)
Width: 4.25" (108mm) tapering down to 1.5" (38mm)
Height: 4" (101mm)

You Might Also Like...