Tamiya 1/24 Heavy Dump Truck GF01 TAM58622


Item # TAM58622
$232.00 $139.99
(You save $92.01)
Status: In Stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(12, 131, 0);\'>Available Now!</b></span>
Tamiya 1/24 Heavy Dump Truck GF01 TAM58622

More information about Tamiya 1/24 Heavy Dump Truck GF01 TAM58622

This is the Tamiya 1/24 Heavy Dump Truck GF01.

This R/C assembly kit depicts a dump truck modeled upon those which do the heavy work in locations like quarries and large-scale construction sites. The model is based on the popular gear-driven GF-01 chassis.

The GF-01 chassis plays off the successful and fun line-up of RC kits such as the Wild Willy 2, Volkswagen Type 2 and the Farm King Wheelie. Whereas those kits featured a 2WD and easy to wheelie platform, the new GF-01 is a 4WD incarnation with the motor directly placed in the center in order to drive the gears in the front and rear gearboxes.

Includes: Heavy Dump Truck Kit with Brushed Motor, ESC, Shocks, Decal Sheet, Tires, Wheels, 18T Pinion Gear and Instruction Manual


  • Radio: 2-channel with high-torque steering servo
  • Battery: 7.2V NiMH battery with Standard connector
  • Charger: To match selected battery
  • AA Cells: For transmitter
  • Building and Track Equipment
  • Chassis: GF-01 lightweight monocoque resin with wheelie bar to prevent flipping over backward during wheelies
  • Drive: 4 wheel, dogbone driveline
  • Motor: Tamiya Sport Tuned RS-540 brushed, center mounted
  • Electronic Speed Control: TBLE-02
  • Differentials: Bevel gear type
  • Gearboxes: Sealed
  • Cab and Rear Bed: Injection molded resin, bed may be displayed in flat or raised position by changing the position of the two stays and snap pins in the body mounts. It is not advisable to put objects in the rear bed, or drive the model with the bed elevated *bed is not remote controlled*
  • Front Bumper: Spring loaded
  • Shocks: Plastic body friction, not oil-filled
  • Suspension: Four wheel double wishbone
  • Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm) diameter
  • Wheels: Orange plastic 1.9" (49mm) diameter, 2.3" (58.5mm) wide 12mm hex
  • Steering: Bell crank type
  • Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

Length: 13.8" (350mm)

Width: 10.6" (270mm)

Height: 8.3" (210mm)

You Might Also Like...