Tamiya RC Buggy Kumamon Version DT-02 TAM58615


Item # TAM58615
$159.00 $99.99
(You save $59.01)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Tamiya RC Buggy Kumamon Version DT-02 TAM58615

More information about Tamiya RC Buggy Kumamon Version DT-02 TAM58615

This is Easy to Assemble Tamiya RC Buggy Kumamon Vesion DT02. The popular Japanese mascot Kumamon has found his way into the DT02 Dune Buggy Chassis.

The popular Japanese mascot Kumamon has found his way onto the DT-02 dune buggy chassis. This easy-to-assemble chassis and popular Japanese mascot are a fun combination for R/C newcomers and fans of Japanese pop culture!

Includes: 1/10 scale Tamiya Kumamon Buggy Kit with Body, Wheels, Tires, ESC 380 Motor, Servo Saver, Driver Figure, Decals and Instruction Manual


  • Radio: 2-channel with steering servo
  • Battery: 6-cell, 7.2V NiMH stick pack with standard connector
  • Battery Charger: To match selected battery
  • Transmitter Batteries: Four or eight depending on transmitter
  • Tools and track equipment

Please Note: This does not come with a radio, charger, battery pack, PS spray, batteries or tools. 

  • Chassis: DT-02 ABS plastic tub
  • Drive: Rear wheel
  • Motor: 380 size (540 size will fit)
  • Pinion Gear: 10 tooth metal
  • Electronic Speed Control: Tamiya TBLE-02S with reverse
  • Differential: Planetary gear
  • Gearbox: Sealed
  • Shocks: Plastic body, friction type
  • Transmission: Single-speed
  • Suspension: Four wheel independent
  • Body: Molded plastic, red in color
  • Steering: Two-piece adjustable steering tie rods with servo saver
  • Tires: Ribbed front 0.83" (21mm) wide, 3.1" (80mm) diameter
    Spiked rear 1.5" (39mm) wide, 3.2" (82mm) diameter
  • Wheels: Nylon resin, white in color
    Front, 0.69" (17.5mm) wide, 2.2" (57mm) diameter
    Rear, 1.3" (33mm) wide, 2.2" (57mm) diameter, 12mm hex
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Non-adjustable


Length: 15.3" (390mm)

Width: 9.4" (240mm)

Height: 6.6" (168mm)

Weight: 2.9lbs (1350g), approximate


Length: 14.5" (369mm)

Width: 7" (178mm)

Height: 2.3" (55mm)

You Might Also Like...