Tamiya RC Mazda 787B No.18 RM01 1/10 On-Road Car Kit TAM58555


Item # TAM58555
$304.00 $204.99
(You save $99.01)
Status: In Stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
On-Road Car
Tamiya RC Mazda 787B No.18 RM01 1/10 On-Road Car Kit TAM58555

More information about Tamiya RC Mazda 787B No.18 RM01 1/10 On-Road Car Kit TAM58555

This is the Tamiya RC Mazda 787B No.18 RM01. The 1991 Mazda 787B Le Mans racer is the latest body to be offered in Tamiya's popular and successful RM-01 kit product line-up.

Tamiya decided to create the RM-01 chassis in response to the 1/12 scale racing resurgence that's currently being seen around the world. The RM-01 chassis features a pivot-ball link rear (PBLR) suspension and a Direct Drive 2WD setup to provide you with linear throttle and steering response, as well as realistic racing action.

Includes: Mazda 787 No. 18 On-Road Race Car Kit, Tires, Wheels, Body, Decals, 14T Pinion Gear and Instruction Manual


  • Radio: 2-channel with standard size steering servo
  • Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by Tamiya not available in USA)
  • ESC: Compatible with included motor
  • Battery Charger: LiPo compatible
  • Polycarbonate safe spray or brush on paint
  • Building and track equipment
  • Chassis: RM-01 0.098" (2.5mm) thick FRP lower deck
  • Drive: Rear wheel direct, steel rear axle
  • Motor: 380 size brushed (540 motor, not included, can be installed with the removal of motor plate adapter)
  • Front Suspension: Independent design with optimized kingpin trail for increased stability
  • Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball pitch damper to control chassis pitch, roll damper and side links to control chassis roll
  • Differential: Ball type
  • Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be used with this chassis
  • Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front 0.98" (25mm) wide, rear 1.2" (32mm) wide
  • Body: Clear untrimmed polycarbonate plastic with white plastic helmeted driver head
  • Spur Gear: Plastic 63T 06 module

Scale: 1/12 scale
Drive-train: 2WD RWD
Suspension: PBLR (Pivot Ball Link Rear Suspension)
Body material: Clear Polycarbonate
Motor type: 380-brushed type


Wheelbase: 7.9" (201mm)


Length: 12.1" (308mm)
Width: 6.8" (174mm)
Height: 2.8" (71mm)