Tamiya RC TB-04R Chassis Kit TAM84412

Tamiya

Item # TAM84412
$654.00 $429.99
(You save $224.01)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 4
Vehicle Type:
On-Road Car
UPC:
4950344844128
Tamiya RC TB-04R Chassis Kit TAM84412

More information about Tamiya RC TB-04R Chassis Kit TAM84412

This is the Tamiya RC TB-04R Chassis Kit. The TB-04R is the “Racing Version” of the popular TB-04 Chassis platform. The kit comes with many of the Hop-Up-Option parts that have been developed to enhance the performance of the car. All the plastic FRP (Fiberglass Reinforced Parts) have been replaced with Carbon Reinforced Plastic for superior feel and durability on the race track.

Standard Spec TB-04 VS. TB-04R:
The TB-04 is a 1/10 scale 4WD machine that incorporates a drive-shaft down the center of the chassis to engage the front and rear gearboxes. The differentials inside the gearboxes are newly designed as they utilize a sealed gear differential system whereby the internal gears movement is controlled by different viscosity differential fluids. The TB-04R comes with a Front Direct Coupling (Spool) and the standard rear sealed gear diff unit.

The double-wishbone suspension system on the standard TB-04 utilizes the same short reversible type that has been used on the TB-03, TA-05 Version II, TA-06 and the TRF (Tamiya Racing Factory) 416 and 417 World Championship machines. The TB-04R is equipped with TRF418/419 suspension components.

The TB-04 also incorporates IFS (inboard front suspension) whereby the front shocks are positioned horizontally and low to the chassis, so that low profile sports car body shapes can be accurately reproduced without losing any realistic scale appearance. The TB-04R is equipped with front and rear carbon plate shock towers, but it’s possible to use an IFS set up if desired.

Includes: TB-04R On-Road Chassis Kit with Decals, Shocks, Shock Oil, Spur Gear and Instructions

Included Tune-Up Parts:

  • TRF418 Suspension Arm & Front/Rear Uprights
  • TRF Big Bore Dampers x4
  • Aluminum Suspension Mounts (1A x2pcs., 1XB, 1D)
  • Item 54592 TB-04 Front Direct Coupling
  • Rear Gear Differential Unit
  • TB-04 Aluminum Steering Arms (L/R, Black)
  • Aluminum Turnbuckle Shafts
  • Hex Screws
  • Lightweight Universal Shaft Set (Rear) x2
  • TB-04R Carbon Front/Rear Damper Stays* (designed specifically for this chassis kit)
  • Item 54578 06 Hard Coated Aluminum Pinion (25T)
  • TB-04 Aluminum Steering Bridge (Black)
  • Front Double Cardan Drive Shafts (44mm)
  • Full Ball Bearings

Requires:

  • Radio: 2-channel with steering servo
  • AA Batteries for Transmitter
  • ESC: Compatible with selected motor
  • Motor: 540 size
  • Pinion Gear: 06 module
  • Battery: NiMH 7.2V 6-cell stick pack
  • Charger: To match selected battery
  • Body: 1/10 scale on-road car
  • Wheels: 1.9 (48mm) diameter, 1 (25.4mm) wide,
  • Tires: Medium narrow 0.94 (24mm) wide, with inserts
  • Building and track equipment
  • Chassis: Carbon reinforced plastic
  • Drive: Four wheel shaft drive with dogbone driveline, front direct coupling (spool)
  • Transmission: Newly designed case provides increased stability during acceleration
  • Rear Differential: Sealed gear type
  • Suspension: Short reversible double wishbone, IFS (inboard front suspension) positions front shocks horizontal and low to the chassis to enable usage of low profile sports car bodies
  • Shocks: TRF Big Bore, oil-filled, titanium coated shafts
  • Shock Towers: Carbon plate 0.12" (3mm) thick
  • Steering: Bell crank with servo saver, long steering tie-rod system refined from the TRF417 chassis
  • Motor Mount: Aluminum
  • Ball Bearings: Full set of shielded bearings
  • Bumper: Front foam
  • Spur Gear: 66T plastic
  • Track: Adjustable, outer edges of wheels measured side-to-side
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

Length: 14.6" (370mm)

Width: 7.4" (187mm)

Wheelbase: 10.1" (257mm)