Tamiya Toyota FJ Cruiser Kit 4WD Kit CR-01 TAM84411

(You save $163.50 )
Sold Out
  • Tamiya Toyota FJ Cruiser Kit 4WD Kit CR-01 TAM84411
  • Tamiya Toyota FJ Cruiser Kit 4WD Kit CR-01 TAM84411
  • Tamiya Toyota FJ Cruiser Kit 4WD Kit CR-01 TAM84411
  • Tamiya Toyota FJ Cruiser Kit 4WD Kit CR-01 TAM84411
Related Products:
Sold Out
Add to Cart
(You save $163.50 )

Sold Out


View All



View All



This is the 1/10 Scale Toyota FJ Cruiser Kit 4WD Kit CR-01 by Tamiya. The highly popular Toyota FJ Cruiser that is available on the Tamiya CC-01 (Cross Country) platform has found its way onto the CR-01 platform, for a limited time only.

The tough CR-01 chassis has a ladder frame featuring aluminum side channels, and resin cross members, as well as a 4-link rigid suspension with oil dampers actuated via aluminum push rods. This set-up gives the suspension stroke needed to handle rugged, rocky surfaces. The motor is placed in a central position, with planetary gears enabling low-speed shaft-driven 4WD. 125mm-diameter tires are fitted to bead lock wheels, and make an impressive combination with the lightweight and durable polycarbonate body.

Includes: Tamiya Toyota FJ Cruiser Rock Crawler chassis with 20 tooth pinion gear, oil-filled shocks, 540 motor, 3-piece beadlock wheels, body, tires, decal sheet, spur gear, instructions


  • Radio: 2-Channel with 1 Servo
  • Radio Batteries: (8) AA size
  • Battery: 6-cell stick pack w/standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Misc. Items: Paint, building and track equipment
  • Chassis: CR-01 dedicated crawler chassis with heavy duty ladder frame pressed aluminum channels and resin cross members
  • Drive: Four wheel shaft drive
  • Motor: 540 size
  • Ball Bearings: Full set included
  • Shocks: Oil-filled, compressed via pushrods and rocker arms
  • Gearbox: Planetary type with 20 tooth pinion gear for a 40.5:1 gear ratio, separately available 16 - 25 tooth pinion gears for gear ratios ranging from 50.6:1 - 32.4:1
  • Transmission: Single speed
  • Tires: Rock crawler type 4.9" (125mm) diameter, 2.2" (56mm) wide with foam inserts, block pattern tread
  • Wheels: Plastic 3-piece beadlock 2.8" (71mm) diameter, 1.4" (35.8mm) wide, black in color
  • Body: Lightweight clear polycarbonate
  • Bumper: High impact front plastic
  • Suspension: Four link coil spring front and rear
  • Differential: Planetary gear
  • Steering: Adjustable, direct link with servo saver


Length: 17" (435mm)

Width: 10.43" (265mm)

Height: 10.47" (266mm)

Weight: 5.66lbs (2567g) approx.

Wheelbase: 11.34" (288mm)

Gear Ratio: 40.5:1 with supplied 20T pinion gear



Length: 17.2" (438mm)

Width: 7.6" (193mm)

Height: 5.3" (135mm)

You Might Also Like...