Tamiya Volkswagen Scirocco GT24, FF03 1/10 On-Road Car Kit TAM58505

Tamiya

Item # TAM58505
$340.00 $189.99
(You save $150.01)
Status: In Stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 4
Vehicle Type:
On-Road Car
UPC:
4950344585052
Availability:
<span><b>Sandy, UT</span><br/><span style="color: rgb(255,0,0);">Available Online Only</b></span>
Tamiya Volkswagen Scirocco GT24, FF03 1/10 On-Road Car Kit TAM58505

More information about Tamiya Volkswagen Scirocco GT24, FF03 1/10 On-Road Car Kit TAM58505

The 2008 24 Hours Nrburgring had Volkswagen debut a contingent of new Scirocco GT24 race cars. They went on to earn an impressive 1-2 finish in their inaugural race.

The car was later updated with a new 2.0-liter inline 4-cylinder turbocharged engine that was notable for being powered by Compressed Natural Gas (CNG), which reduced CO2 emissions by 80%. This machine again demonstrated its superb performance, capturing the AT (alternative powertrain) class titles in 2009, 2010, and 2011. The Tamiya R/C car model is produced in 1/10 scale and the featured chassis underneath is the FF-03 (Tamiya's 3rd generation Front-Wheel-Drive chassis). The RC model depicts the Scirocco GT24-CNG which raced in the 2011 24 Hours Nrburgring.

Includes: 1/10 scale FF-03 On-Road Chassis Kit, wheels, slick tires, foam inserts, motor, decals, shock oil, clear body, spur gear, pinion gear and instruction manual

Requires:

  • Radio: 2-channel with high speed standard size servo
  • Electronic Speed Control: For stock brushed motors
  • Building and track equipment 
  • Chassis: Composite construction with newly designed lower deck
  • Drive: Front wheel
  • Motor: 540 size brushed
  • Wheels: Ten-spoke 2" (52mm) diameter, 0.94" (24mm) wide, black in color, 0º offset
  • Tires: 2.4" (61mm) diameter, 1.0" (25.5mm) slicks with foam inserts
  • Bumper: Front urethane
  • Spur Gear: 68 tooth composite
  • Pinion Gear: 26 tooth metal
  • Differential: Ball type
  • Steering: Bellcrank type equipped with ball bearings
  • Body: Clear untrimmed polycarbonate with separately molded rear wing
  • and mirrors
  • Shocks: Oil-filled CVA type
  • Suspension: Four wheel double wishbone with IFS (Inboard Front Suspension) with short reversible suspension arms
  • Wheelbase: Kit can be assembled with long (10.1" 257mm), medium (9.6" 245mm) or short (9.2" 233mm) wheelbase by altering the rear assembly
  • Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • 1/10 scale R/C assembly kit
  • VW Scirocco body is realistically reproduced with polycarbonate material
  • Sticker and masking sticker sheets included
  • Separately-molded side mirrors and rear wing parts included
  • The front-motor FWD FF-03 chassis features Inboard Front Suspension, ball differential, and CVA oil dampers
  • Independent double wishbone suspension
  • Medium-narrow 10-spoke Gun Metal wheels (offset 0) are included

Vehicle

Length: 15.1" (384mm)

Width: 7.3" (185mm)

Tread: 6.2" (157mm) center of tires, side-to-side

Wheelbase: 10.1" (257mm)

9.6" (245mm)

9.2" (233mm)

Body

Length: 16.7" (425mm)

Width: 7.4" (188mm)

Height: 4.1" (104mm)

You Might Also Like...