HPI Venture Toyota FJ Cruiser Gunmetal HPI116558

HPI Racing

Item # HPI116558
$699.99 $369.99
(You save $330.00)
Status: Out of stock
Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 1
Vehicle Type:
Rock Crawler
HPI Venture Toyota FJ Cruiser Gunmetal HPI116558

More information about HPI Venture Toyota FJ Cruiser Gunmetal HPI116558

This is the HPI Venture Toyota FJ Cruiser. An all-new platform for scale crawling fanatics, the Venture combines a realistic front motor position, metal chassis rails and realistic drivetrain with the Toyota FJ Cruiser for a fantastic off-road experience only HPI can deliver! With a licensed replica body that includes front and rear bumpers, mirrors, roof rack and rear tire mount, the Venture brings total scale realism to crawler fans. Underneath the body, the metal chassis rails support a front-mounted motor, central transfer case, telescoping driveshafts and solid axles with metal suspension pieces. Authentically scaled oil-filled shock absorbers and full-time locked differentials work with the tires for confident driving in any off-road environment.

Includes: NiMH battery and charger and 4 AA batteries for radio transmitter

  • Factory-assembled & pre-painted electric-powered full-time 4WD 1/10 scale off-road truck
  • Officially licensed replica Toyota FJ Cruiser body with functional roof rack plus side mirrors
  • Front bumper features brush guard, light mounts, D-ring shackles and swing-away rear spare tire mount
  • Adjustable rock rail side sliders help the truck get over tough obstacles
  • Steel C-channel chassis rails
  • Front-mount motor and transmission position for ultimate scale realism and front weight bias to improve climbing traction and provides more realistic driving
  • All-metal gear drivetrain for extreme durability
  • Central transfer case with slider driveshafts to front and rear differentials prevents motor stall for the best climbing action and also straightens & lowers center driveshafts for more efficient power transfer
  • Axles feature locked differentials with small diff case and aluminum differential pumpkin cover
  • HPI water-resistant SS-20WR high torque steering servo with CMS (Chassis Mounted Servo) realistic steering setup
  • HPI waterproof SC-3sWP2 Crawler Edition adjustable electronic speed control
  • HPI 35-turn crawler spec motor provides speed as well as crawling torque
  • 12mm hex hubs to fit any available crawler wheels
  • Shock towers have multiple shocks mounting positions to allow for wheelbase options
  • BTA (Behind The Axle) steering linkage for improved approach and departure angles
  • Panhard bar with aluminum Panhard mount for scale looks and optimized geometry with zero bump steer
  • Zero Ackermann high steer knuckle design for improved obstacle clearance and tighter turning radius
  • 3-link front and triangulated 3-link rear suspension
  • Oil-filled aluminum Coilover shock absorbers (63-90mm stroke) with adjustable threaded shock bodies for quick ride height changes and dual-stage shock springs
  • Aluminum lower link/shock mounts
  • Adjustable fully braced body mounting to fit any style of off-road body
  • All-terrain Rockthorn 109mm x 38mm soft S-Compound tires with chunky tread blocks
  • Beadlock style CR-10 ten-spoke 1.9” wheels
  • HPI TF-40 2.4GHz radio system with carrying handle
  • HPI waterproof 2.4GHz receiver in protective case
  • Full set of ball bearings

Length: 527mm (20.7")

Width: 227mm (9")

Height: 238mm (9.4") with roof rack, 217mm (8.5") without (will vary depending on tire choice and suspension settings)

Wheelbase: 311mm (12.3")

Front overhang: 101mm (3.9")

Rear overhang: 135mm (5.3")

Running weight: 2.4kg (5.3lbs)

Weight without battery: 2.1kg (4.7lbs)

Break-over angle: 44.5 degrees

Approach angle: 55 deg

Departure angle: 45.5 deg

Max climb angle: 49 deg

Max tilt angle: 28 deg

Axle articulation: 30 deg

Ground clearance: 68mm capable (2.7")

Ground clearance at standard ride height: 60mm (2.4")

Axle ground clearance: 32mm (1.3")

Drivetrain ratio: 7.6:1

Transmission gearing: 1.53:1

Axle gearing: 3.31:1

Transfer case gearing: 1.5:1