RC4WD Gelande II Kit w/Cruiser Body RC4Z-K0051

RC4WD

Item # RC4Z-K0051
$529.99 $429.99
(You save $100.00)
Status: In Stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 3
Vehicle Type:
Rock Crawler
UPC:
812115025089
RC4WD Gelande II Kit w/Cruiser Body RC4Z-K0051

More information about RC4WD Gelande II Kit w/Cruiser Body RC4Z-K0051

 

This is the RC4WD Gelande II Kit with Cruiser Body. Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class! The G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.

The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity. The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance. Are you ready for your off-road experience?

Requires:

Truck Kit

  • Hex Drivers (1.5mm, 2mm, 2.5mm)
  • Long Nose Pliers
  • Associated Thread Locking Adhesive
  • Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)

Body Kit

  • Modeling / Craft Knife
  • Side Cutters
  • Instant glue / Plastic Cement (prefer non whitening)
  • Hex Drivers (1.5mm, 2mm)
  • Cross Phillips Screwdrivers (small)

Electronics

  • Motor (35t, 45t, or 55t)
  • Electronic Speed Controller ESC (Z-E0007)
  • Radio and Receiver (2 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
  • 1x Standard Size Servo (Z-E0035)
  • Battery (Consult your ESC manual) 6 cell NIMH, or 2 cell Lipo battery
  • Charger (Consult your battery guide) Chargers

Includes: One RC4WD Gelande II Kit with Cruiser Body, Body Trim, Interior, Tires, Wheels, Decals and Instruction Manual

Note: Transmission and axles are preassembled and the manufacturer does not state the size of the ball bearings used in each component.

  • White colored
  • Custom Designed for True to Scale Looks
  • Realistic Aluminum Ladder Frame Chassis
  • R3 Single Speed Transmission
  • Center Mounted Realistic 4x4 Transfer Case
  • Cast Metal Axles with Locked Differentials
  • 3 Link front and 4 Link rear suspension
  • 1.9 Stamped Steel Beadlocks w/lug nuts
  • Super grip dirt grabber Tires
  • Chassis mounted Steering servo
  • Plastic fuel cell receiver box
  • Dual spring oil filled Shock absorbers
All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P hardened steel gears, - 8 bearings, cast casing

All New R3 Single Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57:1 Internal 1.78:1
Gears: Wide steel 32P, Delrin spur, slipper clutch

All New Cast Yota II Axles
Ratio: 15/40 = 2.67:1
Width: at hex 180.5mm

G2 Suspension
Double triangulated 4 Link rear suspension.
3 Link front suspension with panhard bar

Shock Absorbers
Dual Spring 80mm Shocks - Can be oil filled

Wheels
Type: 1.9 5 lug Wagon Wheels
Hub: Pin type Width: 25mm
Back spacing: 11mm

Bumpers
Machined billet aluminum, lightweight

G2 Truck Dimensions
Wheels base: 10.83in / 275mm
Length: 18.35in / 466mm
Width: 8.5in / 215mm
Height: 10.6in / 270mm
Ground clearance: 2.3in / 58mm
Final Drive Ratio: 31.9:1
Weight: 6.57 Lbs / 2.98Kg