This is the 2.4GHz Radio Controlled, RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body Set. Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow or mud than the TF2 RTR. Part scale truck, part adventurer, your TF2 RTR is ready for your mud kicking trail-loving lifestyle!
The TF2 RTR has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2 RTR. Performance of the TF2 is smooth with its TCI R4 Transmission, 4WD drivetrain, bulletproof transfer case and quality metal components throughout. The TF2 RTR is truly a work of art in both appearance and performance.
Every TF2 RTR is compatible with a full range of options and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 off-road truck... The TF2 RTR.
1x RC4WD Trail Finder 2 RTR with Chevrolet Blazer Body Set (Limited Edition)
While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Do not over tighten screws, otherwise you may strip the thread
Wheelbase: 7.8" (200mm)
Width: 19.8" (503mm)
Height: 9.3" (237mm)
Ground Clearance: 2.4" (62mm)
Transmission Gear Ratio: 10.1:1
Final Drive Ratio: 31.9:1
Weight: 8.44lbs (3.83kg)
Tire Inner Diameter: 1.9" (48mm)
Tire Outer Diameter: 3.76" (95.5mm)
Wheel Width: 1.08" (27.5mm Wide)
Wheel Outer Diameter: 1.9" (48mm)