RocHobby Swift 675mm PNP ROH005P

RocHobby

https://www.rcplanet.com/rochobby-swift-675mm-pnp-roh005p/
$159.99 $139.99
(You save $20.00)
Status: In Stock
Availability: ARRIVES BEFORE CHRISTMAS
(No reviews yet)
UPC:
635414739071
Availability:
ARRIVES BEFORE CHRISTMAS

Item # ROH005P

Build Type:
RX-TX Ready
Power Type:
Electric Power
Vehicle Type:
Airplane
More information about RocHobby Swift 675mm PNP ROH005P

This is a RocHobby Swift 675mm Plug-n-Play Airplane. We clocked the RocHobby Swift at 85mph using a pocket radar only to find out later we were using an old LiPo with high IR during the test! Not only is this plane fast but it also is very well mannered and very aerobatic. The wings and fuselage are a single piece of EPO foam with carbon rods molded in for maximum strength and durability. In addition the nose cone is a magnetic break away design, the servo pushrods are top mounted for maximum protection during belly landing, and there is a skid plate on the bottom to protect the fuse and the rear mounted prop. We are not sure if a plane exists that is more fun to fly! The plane is very simple to assemble so you can be in the air in about 30 minutes.

Features:

  • 85+ mph speed clocked using the pocket radar
  • EPO foam construction
  • Very simple assembly
  • Brushless motor, ESC and servos installed

Includes:
Swift PNP, 675mm
User Manual

Requires:
4+ Channel Radio System
LiPo Battery
LiPo Charger

Aileron: Yes
Approximate Assembly Time: Less than 1 Hour
Approximate Flight Time: 5 minutes
Battery: LiPo 11.1V 2200mAh 25C
CG (Center of Gravity): 9.1 in (230mm) from leading edge
Completion Level: Plug-N-Play
Elevator: Yes
Flaps: No
Flying Weight: 20.1 oz (570g)
Length: 25 in (630mm)
Material: Durable EPO
Minimum Required Radio: 4 Channel
Motor Size: 2215-3400KV
Propeller Size: 4.5 - 4.5E 2-blades Highly Performance
Retracts: No
Rudder: No
Servos: 2 - 9g servos
Speed Control: 50A ESC
Wingspan: 26.8 in (675mm)

You Might Also Like...

You Might Also Like...

Overview

More information about RocHobby Swift 675mm PNP ROH005P

This is a RocHobby Swift 675mm Plug-n-Play Airplane. We clocked the RocHobby Swift at 85mph using a pocket radar only to find out later we were using an old LiPo with high IR during the test! Not only is this plane fast but it also is very well mannered and very aerobatic. The wings and fuselage are a single piece of EPO foam with carbon rods molded in for maximum strength and durability. In addition the nose cone is a magnetic break away design, the servo pushrods are top mounted for maximum protection during belly landing, and there is a skid plate on the bottom to protect the fuse and the rear mounted prop. We are not sure if a plane exists that is more fun to fly! The plane is very simple to assemble so you can be in the air in about 30 minutes.

Features:

  • 85+ mph speed clocked using the pocket radar
  • EPO foam construction
  • Very simple assembly
  • Brushless motor, ESC and servos installed

Includes:
Swift PNP, 675mm
User Manual

Requires:
4+ Channel Radio System
LiPo Battery
LiPo Charger

Aileron: Yes
Approximate Assembly Time: Less than 1 Hour
Approximate Flight Time: 5 minutes
Battery: LiPo 11.1V 2200mAh 25C
CG (Center of Gravity): 9.1 in (230mm) from leading edge
Completion Level: Plug-N-Play
Elevator: Yes
Flaps: No
Flying Weight: 20.1 oz (570g)
Length: 25 in (630mm)
Material: Durable EPO
Minimum Required Radio: 4 Channel
Motor Size: 2215-3400KV
Propeller Size: 4.5 - 4.5E 2-blades Highly Performance
Retracts: No
Rudder: No
Servos: 2 - 9g servos
Speed Control: 50A ESC
Wingspan: 26.8 in (675mm)

Product Questions