Team Losi Racing 22 5.0 SR Race Kit 1/10 2WD Spec Racing Dirt/Clay TLR03018

Team Losi Racing

https://www.rcplanet.com/team-losi-racing-22-5-0-sr-race-kit-1-10-2wd-spec-racing-dirt-clay-tlr03018/
$359.99 $319.99
(You save $40.00)
Status: In Stock
Availability: USUALLY SHIPS WITHIN 24 HOURS
(No reviews yet)
UPC:
605482293461
Availability:
USUALLY SHIPS WITHIN 24 HOURS

Item # TLR03018

Build Type:
Ready to Run
Power Type:
Electric Power
Scale:
1/10
Skill Level:
Skill Level 1
Vehicle Type:
Buggy
More information about Team Losi Racing 22 5.0 SR Race Kit 1/10 2WD Spec Racing Dirt/Clay TLR03018
 

The Team Losi Racing® 22™ 5.0 SR buggy picks up right where the 22 4.0 SR left off and is the next evolution of the 22 2WD buggy platform. Optimizing the 22 5.0 SR specifically for dirt and clay tracks in the spec racing classes, the setup window has been narrowed and performance maximized. The revised SR driveline with molded composite outdrives and aluminum saver rings, along with ultra-durable small diameter steel drive shafts, provides the 22 5.0 an ultralight driveline for maximum torque and speed. Included is TLR's innovative and maximized Direct Drive System (DDS) with an ultra-light and short layshaft, aluminum spur gear hubs, and a 72T molded spur gear. Turning focus to the front suspension, the TLR® team found a way to make the 22 5.0 significantly easier to drive while still giving the car more mid-corning steering. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle give the 22 5.0 a significantly smoother steering feel, especially off-center and high speed, while increase low-speed steering for tighter tracks and 180's. The 22 5.0 takes the 22 platform to the next level, and it will take you to the top of the podium!

Requires:

  • Motor 
  • Electronic Speed Control 
  • Servo 
  • Radio System 
  • 48 Pitch Pinion Gear 
  • Charger 
  • Battery 
  • Paint 
  • Tools
  • Lightweight 2.0mm hard-anodized 7075 t-6 aluminum chassis
  • VLA (variable length arm) front suspension
  • 3-gear laydown transmission
  • Updated ball differential
  • G3 12mm big-bore shocks
  • Polished shock shafts and hinge pins
  • Composite bleeder caps
  • Adjustable rear pivots for toe and anti-squat
  • Adjustable aluminum rear camber block
  • All new steering geometry, with improved ackermann
  • HDS slipper with HD spring
  • Spindle with adjustable trail and ackermann
  • Rear hub with aluminum plate
  • 68mm driveshafts
  • Versatile battery hold down
  • Screw mounted rear wing
  • Soft mud guards
  • Built-in cooling fan mount
  • Front wing included
  • Lightweight 22 5.0 body

Type: Buggy
Scale: 1/10
Length: 15.0 in (382mm)
Width: 9.8 in (250mm)
Height: 5.8 in (148mm)
Wheelbase: 11.0 in(280mm)
Chassis: 2mm Milled Plate, 7075-T6 Aluminum
Suspension: Lower A-Arm, Upper Adjustable Link
Drivetrain: 2WD
Tire Type: 22 Dish, 12mm Hex Wheel Type
Motor or Engine: Motor (not included)
Speed Control: Sold Separately
Gear Pitch: 48-pitch
Wheel Size: 2.2 in (56mm) Diameter
Kit/RTR: Kit
Shock Type: 12mm Big Bore, Oil Filled
Body: 22 5.0 Cab Forward, 0.7mm LW
Ball Bearings: Full Rubber Sealed Ball Bearings
Experience Level: Advanced
Recommended Environment: Indoor/Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes

You Might Also Like...

You Might Also Like...

Overview

More information about Team Losi Racing 22 5.0 SR Race Kit 1/10 2WD Spec Racing Dirt/Clay TLR03018
 

The Team Losi Racing® 22™ 5.0 SR buggy picks up right where the 22 4.0 SR left off and is the next evolution of the 22 2WD buggy platform. Optimizing the 22 5.0 SR specifically for dirt and clay tracks in the spec racing classes, the setup window has been narrowed and performance maximized. The revised SR driveline with molded composite outdrives and aluminum saver rings, along with ultra-durable small diameter steel drive shafts, provides the 22 5.0 an ultralight driveline for maximum torque and speed. Included is TLR's innovative and maximized Direct Drive System (DDS) with an ultra-light and short layshaft, aluminum spur gear hubs, and a 72T molded spur gear. Turning focus to the front suspension, the TLR® team found a way to make the 22 5.0 significantly easier to drive while still giving the car more mid-corning steering. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle give the 22 5.0 a significantly smoother steering feel, especially off-center and high speed, while increase low-speed steering for tighter tracks and 180's. The 22 5.0 takes the 22 platform to the next level, and it will take you to the top of the podium!

Requires:

  • Motor 
  • Electronic Speed Control 
  • Servo 
  • Radio System 
  • 48 Pitch Pinion Gear 
  • Charger 
  • Battery 
  • Paint 
  • Tools
  • Lightweight 2.0mm hard-anodized 7075 t-6 aluminum chassis
  • VLA (variable length arm) front suspension
  • 3-gear laydown transmission
  • Updated ball differential
  • G3 12mm big-bore shocks
  • Polished shock shafts and hinge pins
  • Composite bleeder caps
  • Adjustable rear pivots for toe and anti-squat
  • Adjustable aluminum rear camber block
  • All new steering geometry, with improved ackermann
  • HDS slipper with HD spring
  • Spindle with adjustable trail and ackermann
  • Rear hub with aluminum plate
  • 68mm driveshafts
  • Versatile battery hold down
  • Screw mounted rear wing
  • Soft mud guards
  • Built-in cooling fan mount
  • Front wing included
  • Lightweight 22 5.0 body

Type: Buggy
Scale: 1/10
Length: 15.0 in (382mm)
Width: 9.8 in (250mm)
Height: 5.8 in (148mm)
Wheelbase: 11.0 in(280mm)
Chassis: 2mm Milled Plate, 7075-T6 Aluminum
Suspension: Lower A-Arm, Upper Adjustable Link
Drivetrain: 2WD
Tire Type: 22 Dish, 12mm Hex Wheel Type
Motor or Engine: Motor (not included)
Speed Control: Sold Separately
Gear Pitch: 48-pitch
Wheel Size: 2.2 in (56mm) Diameter
Kit/RTR: Kit
Shock Type: 12mm Big Bore, Oil Filled
Body: 22 5.0 Cab Forward, 0.7mm LW
Ball Bearings: Full Rubber Sealed Ball Bearings
Experience Level: Advanced
Recommended Environment: Indoor/Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes

Product Questions